FC-302N200T5134H3688H2BGXXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-302N200T5134H3688H2BGXXXXSXXXXAXBXCXXXXDX is part of the VLT FC 302 Automation Drives series. This unit operates on three phase power with a mains voltage range of 380 to 500 VAC and a supply frequency of 50/60 Hz. It features a standard language pack, includes a brake chopper, and supports maximum output frequency up to 590 Hz with a shielded motor cable length of 150 meters.
Internal Product Review
The FC-302N200T5134H3688H2BGXXXXSXXXXAXBXCXXXXDX is a Danfoss VLT FC 302 automation drive designed for stable three-phase motor control on 380–500 VAC mains. Output capability to 590 Hz and starting torque of 160% for 60 s support demanding acceleration and precise speed regulation. An included brake chopper and Category 3 EMC performance make the unit a strong choice for industrial drive applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302N200T5134H3688H2BGXXXXSXXXXAXBXCXXXXDX is a Danfoss AC variable frequency drive in the VLT FC 302 Automation Drives series. Within an automation cell, it converts fixed-frequency three-phase mains power into a regulated output that allows controllers to match motor speed and torque to real-time load demands. The integrated brake chopper manages regenerative energy during deceleration, while the Category 3 EMC design limits conducted and radiated interference. The LCP 102 local control panel provides direct access to operating data and adjustable parameters. These features support conveyors, pumps, and general material-handling systems that require fast torque response and accessible local controls.
This drive accepts a three-phase input of 380–500 VAC at 50 or 60 Hz, with a frequency tolerance of ±5%. It provides an output frequency range of 0–590 Hz, allowing the inverter to support constant-torque applications and high-speed vector operation. In flux mode, torque builds in 1 ms, while the VVC+ algorithm reaches rated torque in 10 ms for predictable acceleration control. A starting capability of 160% for 60 seconds supports demanding loads such as positive-displacement pumps. The output voltage has a range of 0–100% of the supply voltage, allowing the drive to regulate motor voltage across its operating range. Flux-optimized regulation remains available down to 0 Hz for controlled operation at standstill and low speed. A standard language pack supports local menu access, and I/O shield monitoring helps maintain signal integrity in electrically noisy installations.
Continuous full-load operation is permitted at ambient temperatures up to 45 °C. The thermal algorithm maintains the drive’s rating at installation altitudes below 1000 m. Short overload events are supported at 110% for up to 0.5 seconds, providing additional capacity during brief load changes. The drive accepts shielded motor cables up to 150 m long, while unshielded motor cables may be as long as 300 m. These cable allowances accommodate installations in which the drive and motor are separated by long machine routes. The integrated EMC filter meets Category 3 emission requirements, so the drive does not include the separate C1 filter option.
