FC-302N132T5134F3574H2BGXXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-302N132T5134F3574H2BGXXXXSXXXXAXBXCXXXXDX is part of the VLT FC 302 Automation Drives series and operates with a rated power of 132 kW and a mains voltage range of 380 to 500 VAC. This three-phase automation drive includes a brake chopper, two digital outputs, and an analog output with 12-bit resolution. It meets EN/IEC 61800-3 Cat. 3 EMC standards and supports a max output frequency of 590 Hz.
Internal Product Review
The FC-302N132T5134F3574H2BGXXXXSXXXXAXBXCXXXXDX is a Danfoss VLT FC 302 automation drive designed for high-capacity motor control, with 132 kW rated power and 380 - 500 VAC operation. Three-phase power architecture and an included brake chopper support stable deceleration and dependable process performance in demanding installations. A 590 Hz max output frequency gives the drive excellent application range.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302N132T5134F3574H2BGXXXXSXXXXAXBXCXXXXDX is an AC variable frequency drive engineered by Danfoss for the VLT FC 302 Automation Drives series. Designed for cabinet installation, it converts fixed-frequency plant power into a regulated output that matches commanded speed profiles, allowing precise control of centrifugal fans, positive-displacement pumps, and other induction motor loads. Serving as the electrical link between the mains supply and motor, it also provides the digital and analog interfaces needed for integration with PLC-based automation.
This model delivers up to 132 kW of continuous shaft power while drawing from a supply range of 380–500 VAC. The drive connects to three-phase power, so no external phase conversion is required. The inverter can raise the output frequency to 590 Hz, supporting high-speed applications beyond the base frequency of standard motors; in flux mode, the frequency is limited to 300 Hz to prevent magnetic saturation. The included brake chopper allows a braking resistor to dissipate regenerated energy during rapid deceleration without requiring an external brake module. Five I/O terminals provide one analog output, two digital outputs, and two relay contacts. The analog channel feeds loads up to 500 Ω and provides a 12-bit resolution for precise feedback to supervisory systems.
Electromagnetic emission control complies with EN/IEC 61800-3 Category 3, and immunity meets EN 55011 Class A2, permitting installation in industrial zones where conducted and radiated noise limits apply. The control electronics provide a 24 V auxiliary rail that can supply up to 200 mA for sensors or keypad lighting. A separate 10 V reference supports transducer loads of up to 15 mA. Local setup is handled through the detachable LCP 102 control panel, which displays parameters stored in the drive memory and supports copying settings across multiple units. The standard language package supports the base configuration, while the absence of a C1 filter leaves room for external electromagnetic compatibility accessories when required.
