Product Description:

The FC-302N110T5E21H4BGCXXXS is an AC variable frequency drive engineered by Danfoss for the VLT FC 302 Automation Drives series. Within an automation cell, this converter changes fixed-frequency mains power into a variable output. This allows PLCs to regulate motor speed and torque without mechanical throttling.

With a continuous output capacity of 110 kW, the drive can supply process machinery that demands high electrical power. Its equivalent mechanical rating is 150 HP, a value commonly used for equipment rated in imperial units. Input compatibility spans 380 – 500 VAC, allowing the inverter to connect directly to common industrial feeders. It operates on three-phase power, so no phase conversion hardware is required. Electromagnetic interference is limited by an integrated filter rated for RFI class A1 (C2), allowing installation in locations that must meet category C2 emission limits without external filters.

A built-in brake chopper dissipates regenerated energy during rapid deceleration, protecting upstream circuits when heavy loads stop suddenly. Operators interact with the drive through the graphical local control panel, which presents real-time status information and provides access to parameters at the enclosure door. The interface allows operating information to be viewed without opening the housing, helping preserve the installed protection level during routine use. The housing has an IP21 / Type 1 protection level, so it blocks large foreign objects and vertical water drips when installed in an appropriate indoor location. The coated circuit boards reduce moisture-induced leakage paths and provide additional protection from airborne contaminants. Standard gland plates provide organized cable entry into the enclosure, and the drive does not include a dedicated mains option module.