FC-302N110T5E20
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The FC-302N110T5E20 is a energy efficient converter built by Danfoss Automation. It is designed according to international standards carries CE and UL certification markings. The peak installation height for this product without derating is about 1000 meters above sea level.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302N110T5E20 is a reliable frequency converter designed by Danfoss Automation for the accurate control of the induction motors. This converter boasts of maintaining a low cost of ownership during its operation; it is a maintenance-free device that automatically adjusts the current it supplies to connected motors depending on the load connected to the motor shaft. This frequency converter has been tested in an independent laboratory and approved to meet international standards for safety, electromagnetic compatibility, and low voltage directives. Motors connected to this frequency converter are protected from over-temperature damage through the built-in Electronic thermal relay, direct temperature sensing and the use of Mechanical thermal switch. The electronic thermal relay (ETR) accurately determines the current temperature of the motor by measuring the current, frequency and operating time.
The FC-302N110T5E20 frequency converter has a built-in fan and a heatsink that work together to ensure optimal cooling of the internal air. The operation of the fan is adjusted by sensors based on the operation status of the product. The installation and operation height of this converter should be between 0 to about 1000 meters above sea level. Above this, 1000 meters of air pressure is expected, and the converter should be derated. The maximum relative humidity level allowed for this product is about 93 percent. The maximum permissible ambient temperature is about 50 degrees Celsius.
The FC-302N110T5E20 frequency inverter operates with a mains voltage that falls between 380 to 500 volts also the enclosure of this product provides it with protection according to the IP20 category. Wake Industrial provides a 12-month warranty for this product; it is also delivered in a recyclable cardboard package that maintains a permissible ambient temperature around it during transportation and storage.
Frequently Asked Questions about FC-302N110T5E20:
Q: What is the protection category of the FC-302N110T5E20 frequency converter?
A: The FC-302N110T5E20 frequency converter is an IP20 device. It requires installation into a switch gear cabinet for optimum protection.
Q: What are the conditions that can lead to the automatic derating of the FC-302N110T5E20?
A: The automatic derating of the can be caused by High motor load, High DC link voltage, low motor speed, and critical high temperature.
Q: Can the FC-302N110T5E20 be used under phase imbalance mains?
A: No. The operation of the FC-302N110T5E20 under severe main imbalance conditions can reduce the lifetime of the motor.
Q: What is the operation efficiency of this product?
A: Under normal operating condition, the FC-302N110T5E20 will function at an efficiency level as high as 95 percent.
Q: Is the FC-302N110T5E20 internationally certified?
A: Yes. The FC-302N110T5E20 is certified to meet CE, and UL standards.
