FC-302N110T5134H3684H2BGXXXXSXXXXAXBXCXXXXDX
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The FC-302N110T5134H3684H2BGXXXXSXXXXAXBXCXXXXDX frequency converter is equipped with an internal RFI filter, and a brake chopper. It has a power rating of 110 kilowatts, and is classified as a three phase device. The converter comes with a Graphical Local control panel with a display unit and keyboard.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302N110T5134H3684H2BGXXXXSXXXXAXBXCXXXXDX is an energy efficient, frequency converter built by Danfoss Automation, a leading producer of industrial automation devices. It is designed for intermittent duty cycles, this allows it efficiently alternate between active load operation and periods of no load. This also makes it perfect for motors used in applications that do not require continuous power but demand precise motion control. This converter can be used at a height as high as 3000 meters above sea level, however for operation without derating, the installation height for this product should be maintained between 0 to about 1000 meters above sea level.
The FC-302N110T5134H3684H2BGXXXXSXXXXAXBXCXXXXDX frequency converter allows users to store parameter settings in four different configurations. This makes it easy to switch between setups and make adjustments without affecting the active operations of both the converter and the drive. The converter also has a slip compensation feature that helps to prevents variations in the attached motor's speed. This improves the efficiency and overall performance of motors connected to the converter. The slip compensation feature of the converter is able to maintain a stable motor speed by automatically increasing or decreasing the frequency of the output current based on the load of the motor.
The FC-302N110T5134H3684H2BGXXXXSXXXXAXBXCXXXXDX frequency converter stores electrical energy in its DC-link capacitors. These capacitors can remain charged even after power is turned off. It is possible to control this converter locally through the Graphical Local Control Panel (LCP) integrated into the front part of the converter. This control panel features a display unit and a keypad through which command instructions can be communicated. Operations that can be set through this local display includes alarms, and the start and stop operation. Operators are also able to remotely control the operation of this drive through analog, digital and serial bus connection interface.
Frequently Asked Questions about FC-302N110T5134H3684H2BGXXXXSXXXXAXBXCXXXXDX:
Q: Can the FC-302N110T5134H3684H2BGXXXXSXXXXAXBXCXXXXDX be used outside industrial environments?
A: It is possible to install and use this frequency inverter outside industrial environments. However the immunity requirements in these environments will be lower than in industrial environment.
Q: Does the FC-302N110T5134H3684H2BGXXXXSXXXXAXBXCXXXXDX frequency inverter require a control cabinet during installation?
A: The FC-302N110T5134H3684H2BGXXXXSXXXXAXBXCXXXXDX is an IP51 device. It can be directly mounted on a frame out the need for any control cabinet.
Q: How does the FC-302N110T5134H3684H2BGXXXXSXXXXAXBXCXXXXDX frequency converter maintain optimum cooling during operation?
A: There is an air blower installed at the back of the converter. The blower generates the air flow used for the cooling of the inverter.
Q: What maintenance operation is required for the FC-302N110T5134H3684H2BGXXXXSXXXXAXBXCXXXXDX to maintain optimum operation?
A: This frequency converter has a built-in filter that requires periodic cleaning by the operator depending on the exposer of the filter to dust. Maintenance interval for the cooling fan present in the product is about 3 years.
Q: Can the FC-302N110T5134H3684H2BGXXXXSXXXXAXBXCXXXXDX withstand vibrations during its operation?
A: The FC-302N110T5134H3684H2BGXXXXSXXXXAXBXCXXXXDX has been tested with an 0.7g force over the range of 18 to 1000 hertz for 2 hours. The converter comply with vibration levels that correspond to these conditions.
