FC-302N110T5134F0306H2XGXXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-302N110T5134F0306H2XGXXXXSXXXXAXBXCXXXXDX is part of the VLT FC 302 Automation Drives series and supports three phase power with a mains voltage range of 380 to 500 VAC. This drive has a power rating of 110 kW and is rated for 150 horsepower. It comes with a standard language pack and has no C1 options or adaptation B.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-302N110T5134F0306H2XGXXXXSXXXXAXBXCXXXXDX is a variable frequency drive produced by Danfoss as part of the VLT FC 302 Automation Drives series. Intended for cabinet installation, the unit modulates the voltage and frequency delivered to an AC induction motor so plant controllers can adjust speed, ramp profiles, and process throughput without mechanical throttling. Within an automation cell, it serves as the interface between the three-phase mains supply and the motor terminals. The drive supplies regulated torque, soft-start capability, and diagnostic feedback to a higher-level controller, while its compact frame and integrated terminals simplify wiring.
The electrical section is sized for a continuous output of 110 kW, providing sufficient capacity for high-power pumps or large conveyor systems. This output corresponds to 150 HP and indicates the maximum continuous shaft power available from a compatible connected motor. The input bridge accepts line voltages from 380 to 500 VAC, allowing the model to operate on common 400 V and 480 V networks. The drive uses three-phase power, so no phase-conversion hardware is needed, and its rectifier and DC link support symmetrical line loading. The series code is 302, placing the unit within the FC 302 product line and its associated control architecture.
The drive has no application-specific adaptation, so specialized sensor interfaces or application functions are not preinstalled. It is supplied with no C1 option; an external filter must be installed in the cabinet when category C1 emission limits apply. Operator interaction is supported by the standard language pack, which includes English and common European language menus. The unit accepts compatible Danfoss option cards, fieldbus modules, and keypad accessories for communication and local control. Its cabinet-oriented design allows the power, motor, and control conductors to be routed through the integrated connection points while keeping the operator interface accessible from the front.
