134U3824
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-302P3K0T5E55H1BGXXXXSXXXXA0BXC4XXXD0
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss 134U3824 is part of the VLT FC 302 Automation Drives series and features an IP55/Type 12 enclosure rating. This drive supports a power rating of 3.0 kW (4.0 HP), operates on a 380-500 VAC 3-phase input, and includes an integrated brake chopper. It weighs 12.66 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Engineered by Danfoss, this 134U3824 automation drive is operated with motors that have a 0.25 kW to 75 kW power rating. The drive has to comply with the conditions specified in its documentation. This product’s connection with the associated motor is done using cables that are as short as possible. The device’s output frequency should never rise to higher than 590 Hz. This unit’s Off/Reset key should be pressed to prevent unplanned motor start when its power connection is active. Its product label at the top highlights the minimum waiting time for the capacitors to discharge fully. The drive’s operation isn’t permitted in environments with airborne corrosive gases, particles, or liquids.
This product’s housing has hoist rings for lifting purposes. The device allows another drive to be installed adjacent to it. This unit’s lifting equipment should be able to withstand its weight. Its mounting should be carried out on a clean and flat surface. The drive uses an input fusing for overcurrent and short circuit protection. This product’s ground wires have a 7 AWG minimum cross-section. The device’s outer cable insulation must be stripped a little to ground the cable shield. This unit may cause injury if there is no shielding of the output motor cables. Its thermistor control wiring must be shielded and reinforced.
The automation drive’s control wiring needs a check for isolation from power and motor lines to ensure noise immunity. This product’s auxiliary components on the input side must be capable of supporting full-speed operation. The device shouldn’t have loose connections on its terminals at any time. This unit’s programming parameters are accessed through the Main Menu. It cannot be reset until the electronic thermal inverter protection counter is below 90%.
Frequently Asked Questions about 134U3824:
Q: How is the ground wire of the 134U3824 drive connected?
A: The ground wire of the 134U3824 drive is connected to the nearest grounding terminal.
Q: What is the color of the indicator light of the 134U3824 drive when a warning is active?
A: The color of the indicator light of the 134U3824 drive when a warning is active is yellow.
Q: What happens when the Off key of the 134U3824 drive is pressed?
A: When the Off key of the 134U3824 drive is pressed, the associated motor is stopped, but the power is not disconnected from the drive.
Q: When does the red indicator light of the 134U3824 drive start flashing?
A: The red indicator light of the 134U3824 drive starts flashing when a fault is encountered.
Q: What is the function of the navigation keys of the 134U3824 drive?
A: The navigation keys of the 134U3824 drive are used to move from one item to another in the menu.
