134F3403 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-302P18KT5E55H2XGXXSXSXXXXA0BXCXXXXDX
The Danfoss 134F3403 is a 25 HP automation drive in the VLT FC 302 Automation Drives series, designed for three phase power with a voltage range of 380 to 500 VAC. It features an IP54/Type 12 protection level, an integrated RFI filter, and a graphical local control panel. The drive offers a power rating of 18.5 kW and includes PROFIBUS DP V1 communication support.
Internal Product Review
The 134F3403 is a Danfoss VLT FC 302 automation drive rated for 25 HP with a 380 to 500 VAC input range. PROFIBUS DP V1 communication and a graphical local control panel support efficient commissioning and dependable network integration. IP54/Type 12 protection is a standout advantage for demanding automation service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 134F3403 variable frequency drive is produced by Danfoss as part of the VLT FC 302 Automation Drives series. It regulates the speed and torque of three-phase induction motors in automated material-handling lines, pump skids, and general process equipment, allowing closed-loop control without mechanical throttles. By converting fixed-frequency mains power into a pulse-width-modulated output, it supports energy-efficient operation wherever dynamic speed adjustment is required.
The rated output power is 18.5 kW, enabling the inverter to provide continuous mechanical power to a matched motor. The input section accepts 380–500 VAC across all three lines, so it connects directly to common industrial feeders without step-down transformers. Because the unit uses three-phase power, its rectifier and DC link balance phase currents and help limit harmonics. An IP54, Type 12, and NEMA 3R enclosure shields the electronics from dust and splashing water, supporting installation outside a sealed cabinet. The language pack is set to Standard, and the printed circuit boards are uncoated, so ambient humidity must remain within the drive’s stated operating limits. Proper installation clearances allow heat to leave the enclosure while maintaining access to power and control terminals.
Fieldbus communication is provided by the PROFIBUS DP V1 MCA 101 A-option card, enabling cyclic commands and diagnostic data exchange with PLC controllers. Local interaction is handled through a graphical local control panel that displays parameter lists, operating values, alarms, and fault history at the drive face. Conducted emissions are reduced by the integrated RFI filter, which helps prevent electrical noise from traveling back through the supply network. Wiring passes through imperial smooth cable entry plates that accept North American gland hardware and support orderly routing into the enclosure. The installed interface arrangement provides remote network control and direct local access without requiring separate display equipment. These control paths allow operating values to be viewed locally while commands and diagnostic information are exchanged with the automation system.
