131X9141 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-302P1K5T5E20H1BGXXXXSXXXXALBXCXXXXD0
The Danfoss 131X9141 is part of the VLT FC 302 Automation Drives series and is rated for 1.5 kW of power or 2.0 HP. Designed for normal cabinet mounting, it operates on three phase power at 380 to 500 VAC and features a graphical local control panel. This drive is equipped with an IP20 protection level, brake chopper for safe stop, RFI Class A1/B filter, and standard cable entries.
Internal Product Review
The 131X9141 is a Danfoss VLT FC 302 automation drive with a refined control platform for demanding industrial duty. Three-phase 380 to 500 VAC input gives the unit strong compatibility across standard plant power systems. PROFINET MCA 120 networking and a graphical local control panel make 131X9141 an especially efficient choice for streamlined integration and commissioning.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 131X9141 variable-frequency drive is manufactured by Danfoss for the VLT FC 302 Automation Drives series. Installed in an automation cabinet, it modulates motor voltage and frequency so that a controller can adjust speed and torque without mechanical throttling. The unit belongs to the VLT AutomationDrive FC product group, and its graphical Local Control Panel allows users to review parameters and alarms directly at the machine. This local interface also provides convenient access to operating status, motor data, and drive settings without requiring a separate display device.
It accepts an input range of 380–500 VAC with three-phase power, allowing direct connection to typical industrial mains. The inverter is rated for 1.5 kW, which is equivalent to 2.0 HP, so it can drive small pumps, fans, or conveyors with limited output requirements. The IP20 chassis enclosure helps prevent accidental contact with live parts when the drive is installed inside a closed cabinet, but it does not protect the electronics from water or airborne dust. Normal cabinet mounting for A, B, and C frames aligns the heat sink with the enclosure airflow to support effective heat removal. Standard cable entries simplify gland plate preparation and provide organized routing for power, motor, and control conductors. The printed circuit boards are not coated, so the drive should be installed in a clean, temperature-controlled environment that does not expose internal components to condensation or corrosive contaminants.
The integrated A-slot card is PROFINET MCA 120, enabling real-time Ethernet communication with compatible PLCs and automation controllers. Regenerated motor energy is managed by the built-in brake chopper, which supports controlled deceleration when used with a suitable braking resistor. The D-slot contains an MCB-107 24 V DC backup that maintains control-circuit power during a loss of mains power, helping preserve fault information and communication status. Conducted emissions are limited by the RFI Class A1/B (C1) filter, which supports installation where electrical noise must be controlled. The graphical Local Control Panel provides direct access to operating commands, status information, and parameter menus. Standard cable entries and the panel interface help keep cabinet wiring and local operation straightforward.
