131U8076 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss 131U8076 automation drive is part of the VLT FC 302 Automation Drives series and has a protection rating of IP66 with a NEMA 4X backplate. It handles an apparent power of 2.84 kVA, with a power loss of 62 W and a net weight of 8.44 kg. The drive features a graphical LCP control panel and comes in frame size A4 with dimensions of 391 mm height, 200 mm width, and 177 mm depth.
Internal Product Review
The 131U8076 is a Danfoss VLT FC 302 automation drive that stands out with a graphical LCP and 2.84 kVA apparent power. IP66 / NEMA 4X backplate protection and RFI Class A1/B (C1) EMC capability make the drive a strong fit for controlled industrial installations. An A4 frame and 62 W power loss support efficient integration with solid operating performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 131U8076 is an AC variable frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. It converts fixed-frequency three-phase power into a modulated output, allowing industrial controllers to adjust motor speed and torque without mechanical throttling. By regulating induction motors in conveyors, pumps, and material-handling lines, the unit can match electrical consumption to real-time process demand while supporting controlled acceleration and deceleration.
The drive has an apparent power rating of 2.84 kVA, which indicates the maximum volt-ampere load it can draw from the supply. Conducted emissions are limited by an RFI Class A1/B (C1) filter set, allowing suitable installation on low-voltage public networks. The enclosure has an IP66 / NEMA 4X backplate rating, protecting the internal electronics from dust and powerful water jets when the unit is installed correctly. During operation, the drive dissipates 62 W as heat, which should be considered when planning ventilation and thermal management. Its mass is 8.44 kg, and the mechanical platform uses Frame Size A4 for compatibility with the appropriate FC 302 accessories. The unit does not include an integrated brake chopper, so the system must use another suitable method to manage regenerative energy. A graphical local control panel provides access to parameter settings and fault information. The printed circuit boards are not coated, so the drive should be used where condensation and corrosive vapors are controlled.
For space planning, the drive measures 391 mm in height, 200 mm in width, and 177 mm in depth. These measurements should be checked against the available mounting area, required airflow clearances, and cable-bending space before installation. Field wiring and the removable control panel are accessible from the front, which reduces the need for routine access from the sides or rear. Adequate clearance should still be maintained around the enclosure according to the applicable installation requirements so that wiring, cooling, and maintenance access are not obstructed.
