131U5388 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss 131U5388 is part of the VLT FC 302 Automation Drives series and features a rated power of 0.37 kW with an apparent power of 0.9 kVA. The drive measures 268 mm in height, 90 mm in width, and 205 mm in depth, weighing 4.45 kg. It includes an IP20 enclosure rating and supports PROFINET MCA 120 fieldbus communication.
Internal Product Review
The 131U5388 is a Danfoss VLT FC 302 automation drive rated at 0.37 kW with 3-phase input capability. EMC filter class C2/C1 and PROFINET MCA 120 fieldbus support make the unit especially well suited for clean, networked automation installations. IP20 enclosure protection reinforces dependable panel-mounted service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 131U5388 is a variable frequency drive manufactured by Danfoss within the VLT FC 302 Automation Drives series. It converts fixed-frequency AC power into a regulated output that lets plant controllers adjust induction motor speed for conveyors, pumps, and other continuous-duty equipment in industrial automation. The drive is intended for cabinet installation and supports integrated digital networking.
Under nominal load, the inverter is rated for a motor output of 0.37 kW and an apparent input power of 0.9 kVA. Internal switching and control electronics dissipate 35 W of heat during operation. The power section uses a three-phase input. No additional mains option is installed. Conducted emissions are limited by the built-in C2/C1 EMC filter, so external line reactors are usually unnecessary. Communication with higher-level PLCs is handled through the PROFINET MCA 120 fieldbus card, providing cyclic setpoint exchange and diagnostic data. The printed circuit boards have a 3C2 protective coating that supports operation in atmospheres containing moderate levels of airborne contaminants.
The drive uses Frame Size A2, resulting in a width of 90 mm, a base depth of 205 mm, and a height of 268 mm. The required clearance increases to 220 mm if an option A or option B module is added. Its installation weight is 4.45 kg, simplifying panel assembly and handling. The enclosure has an IP20 rating, so it requires installation in a grounded control cabinet with suitable finger-safe barriers. Because the drive does not include a brake chopper, regenerative energy must be managed by external components. Any harmonic mitigation beyond the built-in EMC filter also requires external equipment. Adequate side and rear spacing maintains airflow across the heat sink and helps prevent thermal derating.
