131N4198
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-302P4K0T5Z55H1XGXXXXSXXXXAXBXCXXXXDX
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The 131N4198 drive offers a nominal power of 4.0 kW, an output current of 10.0 amps, an IP55 enclosure rating, and operates with a 3 x 380-500 V AC input voltage. Part of the VLT FC 302 Automation Drives series by Danfoss, it features an integrated brake chopper, air-cooled operation, and a built-in display control panel.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Offered by Danfoss, this 131N4198 drive’s digital inputs and local control panel can be utilized to start and stop the connected motor. The drive’s electronic thermal relay has the ability to estimate the temperature of the motor. This product’s control torque characteristics are suitable for applications such as cranes, displacement pumps, and conveyor belts. The device enters either a trip or a trip lock state when a fault is encountered. This unit’s repair and/or service is allowed only after ensuring its disconnection from the power supply. It supports Safe Torque Off functionality. The drive’s Protection mode triggers a low switching frequency for minimal losses.
This product’s display supports six alphanumeric lines. The device’s Hand on key can be pressed to control the drive through its local control panel. This unit features two programming modes. Its parameters are classified into groups in the Main Menu mode. The drive’s initialization to its default settings is possible by using its parameters 14 to 22 in Operation mode. This product can solve advanced control functionality problems. The device has keys on its local control panel that can be enabled, disabled, or password-protected. This unit can be set to operate in torque mode or speed mode. It is used with only asynchronous motors.
The automation drive’s accuracy is determined by the internal task time when a standard stop command is used. This product’s keys and indicator lights are located on its control panel. The device-related parameter number, name, and value are highlighted in the center of the display. This unit’s Quick menu lists only the parameters needed for its startup. Its data transfer and storage must be done only after stopping the drive.
Frequently Asked Questions about 131N4198:
Q: What kind of digital outputs does the 131N4198 drive have?
A: The 131N4198 drive has solid-state digital outputs.
Q: How can the Smart Application Setup of the 131N4198 drive be accessed?
A: The Smart Application Setup of the 131N4198 drive can be accessed by pressing the Quick Menu button.
Q: What parameters get reset with the manual initialization of the 131N4198 drive?
A: The serial communication, fault log settings, and RFI filter settings get reset with the manual initialization of the 131N4198 drive.
Q: What should be done when the 131N4198 drive is used for hoisting applications?
A: The protection mode should be done when the 131N4198 drive is used for hoisting applications.
Q: How should the analog and digital inputs and outputs of the 131N4198 drive be connected?
A: The analog and digital inputs and outputs of the 131N4198 drive should be connected separately to its common inputs.
