131F8849
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-302P11KT5E20H1BNXXXXSXXXXAXBXCXXXXDX
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The 131F8849 is a robust drive with an impressive rated output power of 11 kW and a protection rating of IP20/Chassis. Manufactured by Danfoss as part of the VLT FC 302 Automation Drives series, it operates with an input voltage of 3 x 380-500 V AC. The drive supports an output frequency range of 0-590 Hz.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Offered by Danfoss, the 131F8849 automation drive can trigger radio interference in a residential surrounding. This drive is not recommended for applications that demand an output frequency higher than 590 Hz. The product’s lifting must be undertaken with the dedicated eye bolts. This device should have sufficient space above and below it for cable access and the flow of air. The unit’s mains cables, control wires, and motor cables are to be run separately. Its switching frequency must be set appropriately when it is used with a sine-wave filter. This drive’s fastening bolts must be used as high-frequency connections to the rear plate for a low impedance.
The product’s main supply is isolated from the ground by a RFI switch. This device’s U, V, and W terminals are connected to the U, V, and W phases of the related motor. The unit’s connection with the LCL filter is done with a shielded cable. Its terminals can have up to 1099 VDC voltage based on the supply voltage. This drive supports an external power supply connection on the power card if it is supplied by a DC. The product comes equipped with an internal overcurrent protection. This device’s control terminal connectors can be unplugged. The unit-associated motor must have insulated bearings on the non-drive end. Its terminals for the control cables are situated under the local control panel on its front.
This automation drive may cause 50/60 Hz ground loops as a result of noise from mains supply cables in rare cases. The product’s analog input terminals are configured using switches. This device can control several motors with a parallel connection. The unit doesn’t ensure motor overload protection with its electronic thermal relay. Its display shows the INITIALIZING message when the startup is delayed.
Frequently Asked Questions about 131F8849:
Q: What kind of wire is recommended for the power connection of the 131F8849 drive?
A: Minimum 75 °C rated copper wire is recommended for the power connection of the 131F8849 drive.
Q: Why should the motor cable of the 131F8849 drive be kept short?
A: The motor cable of the 131F8849 drive should be kept short to reduce the leakage current and noise level.
Q: When can ELCB relays be used for extra protection of the 131F8849 drive?
A: ELCB relays can be used for extra protection of the 131F8849 drive if the drive is installed and operated according to local safety regulations.
Q: What external supply does the control card of the 131F8849 drive support?
A: The control card of the 131F8849 drive supports an external 24 VDC supply.
Q: How can ground currents be avoided in the 131F8849 drive?
A: Ground currents can be avoided in the 131F8849 drive by connecting the analog and digital outputs and inputs separately to its common inputs.
