131F7924 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-302P11KT5E20H1BXXXXXSXXXXAXBXCXXXXDX
The Danfoss 131F7924 is a drive from the VLT FC 302 Automation Drives series with a power rating of 11 kW and supports a three-phase power supply. It operates on 380 to 500 VAC mains voltage, offers a brake chopper for safe stop, and has an IP20 protection level with standard cable entries. This model is designed for normal cabinet mounting and features an RFI filter class A1/B.
Internal Product Review
The 131F7924 is a Danfoss VLT FC 302 automation drive rated for 11 kW and 380 - 500 VAC operation. Three-phase power input and a brake chopper support controlled deceleration and stable drive response in automation systems. IP20 / chassis protection with an RFI Class A1/B (C1) filter makes this drive a strong choice for clean cabinet integration.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 131F7924 variable frequency drive is produced by Danfoss and belongs to the VLT FC 302 Automation Drives series. It is intended for cabinet-mounted installation inside machine control panels, where it converts three-phase mains power into a regulated output that allows a PLC to vary motor speed in conveyors, pumps, and general process equipment. By managing torque electronically rather than through mechanical throttling, the unit improves energy regulation and reduces startup current stress on connected induction motors. Its cabinet-mounted design also keeps the power electronics protected by the surrounding control enclosure while leaving the drive accessible for wiring and parameter adjustments.
Rated at 11 kW (15 HP), the drive can deliver continuous electrical power suitable for midrange production machinery. The input section accepts a supply of 380–500 VAC and operates with three-phase power, so it connects directly to common plant distribution networks without additional transformers. The IP20 chassis enclosure protects against accidental finger contact with live internal parts. Because the chassis does not provide complete protection from dust or moisture, the drive should be installed inside a suitable closed cabinet. Adequate cabinet clearance and airflow should be maintained so heat can leave the drive during continuous operation. The regulated output supports controlled acceleration and deceleration, reducing mechanical stress on motors, couplings, and driven equipment.
Rapid deceleration is handled by the integrated brake chopper, which diverts excess DC-bus energy to an external resistor rather than allowing an overvoltage trip. Radio-frequency disturbances are limited by the built-in RFI Class A1/B (C1) filter, helping the installation satisfy applicable electromagnetic compatibility limits on the factory floor. This unit has an uncoated printed circuit board, so it should be installed in a clean, dry enclosure away from corrosive vapors, conductive dust, and excessive condensation. The product is version 302, placing it within the corresponding AutomationDrive configuration. The external braking resistor must be selected for the energy produced by the connected load during deceleration. Proper enclosure ventilation and suitable separation between power and control wiring help maintain stable operation and reduce electrical interference.
