131B2124 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-302P2K2T5E20H1BXXXXXS001XAXBXCXXXDX
The Danfoss 131B2124 is part of the VLT FC 302 Automation Drives series and has a power rating of 2.2 kW with a maximum output of 3.0 horsepower. Designed for three phase power at 380 to 500 VAC, this drive features standard cable entries and an IP20 chassis protection level. It includes a brake chopper and RFI Class A1/B filter, and is suited for normal cabinet mounting on A, B, and C frames.
Internal Product Review
The 131B2124 is a Danfoss VLT FC 302 automation drive built for three-phase power systems and 380 to 500 VAC input. A 2.2 kW rating with 3.0 HP capacity gives the drive solid range for precise automation duty. IP20/chassis protection and an integrated brake chopper add strong practical value for cabinet installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 131B2124 is an AC drive manufactured by Danfoss within the VLT FC 302 Automation Drives series. It converts fixed-frequency mains power into a regulated output for induction or permanent-magnet motors used in conveyors, pumps, and general plant equipment. As part of the VLT AutomationDrive FC product group, it uses the mechanical format associated with other 302 models, allowing straightforward cabinet integration. The drive is intended for standard cabinet mounting in A-, B-, and C-frame configurations.
The power stage is rated at 2.2 kW, which corresponds to a mechanical shaft capability of 3.0 HP. Input conductors accept 380–500 VAC from three-phase power commonly found in industrial distribution panels. An integrated brake chopper diverts regenerated energy to an external resistor during deceleration, helping prevent overvoltage trips when the motor returns energy to the DC bus. The brake terminal provides the connection point for the external resistor, allowing regenerated energy to dissipate safely outside the drive enclosure.
The IP20 chassis enclosure requires installation inside a protective panel to reduce exposure to dust and prevent accidental contact with internal components. Conducted radio-frequency noise is limited by the factory-installed RFI Class A1/B (C1) filter, allowing use in ordinary industrial environments without an additional filter. The front-panel slot is fitted with a blank because of the absence of an LCP, so local control requires a remote keypad or communication interface. The drive uses uncoated printed circuit boards, so operating and storage areas should control humidity and airborne contaminants in accordance with Danfoss guidelines. Standard cable entries support orderly routing of power, motor, brake, and control wiring within the cabinet.
