131B0863 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-302P1K1T2E20H1XXXXXXSXXXXA4BXCXXXXDX
The Danfoss 131B0863 is part of the VLT FC 302 Automation Drives series and is designed for normal cabinet mounting. It operates on three phase power with a voltage range of 200 to 240 VAC and delivers a power rating of 1.1 kW or 1.5 horsepower. This drive provides IP20 chassis protection and features a DeviceNet MCA 104 option for connectivity.
Internal Product Review
The 131B0863 from the VLT FC 302 Automation Drives series by Danfoss is a three-phase drive rated for 1.5 HP and 1.1 kW, ideal for light to medium automation tasks. With a mains voltage of 200–240 VAC and IP20 chassis protection, this unit is well-suited for standard cabinet mounting. DeviceNet MCA 104 support and RFI Class A1/B filtering make it a reliable option for environments requiring basic network connectivity and electrical noise suppression.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 131B0863 drive controller is built by Danfoss for the VLT FC 302 Automation Drives series. It is intended for installation on A, B, and C frame panels within a standard control cabinet. In an industrial automation line, the unit modulates motor frequency and voltage to match process demands, providing speed regulation for conveyors, pumps, and general-purpose machinery. This control method lets the drive vary output speed as process conditions change instead of relying on fixed-frequency operation.
The unit has a continuous power rating of 1.1 kW, which corresponds to 1.5 HP. It accepts a supply range of 200–240 VAC and is wired for three-phase power, allowing direct connection to low-voltage industrial mains. The enclosure has an IP20 chassis protection level, so it must be mounted inside a cabinet while still providing finger-safe terminals. Conducted emissions are limited by the integrated RFI Class A1/B (C1) filter to support electromagnetic compatibility. Standard cable entries handle power and control wiring, the language pack is supplied in the standard configuration, the printed circuit boards are uncoated, and no brake chopper is installed for dynamic stopping. Because no separate mains option is fitted, any required isolation or disconnect must be provided on the line side.
The factory configuration focuses on core drive functions. Communication is handled through the A option card, DeviceNet MCA 104, which provides cyclic data exchange with a higher-level controller while the remaining expansion slots are vacant. There is no adaptation B or B option, and the C0, C1, and D option positions are empty while the C option software is omitted. An LCP is not supplied, so parameter access must occur through network commands or a separate handheld operator unit. This arrangement keeps operation centered on network control rather than local keypad access. The product uses series code 302 and is supplied in the Latest Release version.
