131B0618 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-302P2K2T5E20H1XGXXXXSXXXXA4BXCXXXXDX
The Danfoss 131B0618 belongs to the VLT FC 302 Automation Drives series and has a power rating of 2.2 kW or 3.0 HP. It operates with three phase power at 380 to 500 VAC and features a graphical local control panel. The drive is designed for normal cabinet mounting, has a protection level of IP20, and includes an RFI Class A1/B filter.
Internal Product Review
The 131B0618 is a Danfoss VLT FC 302 automation drive rated at 2.2 kW for 380 to 500 VAC service. DeviceNet MCA 104 support and a graphical local control panel make commissioning and network integration especially efficient. IP20 chassis protection with RFI Class A1/B filtering gives this drive a clean, practical fit for cabinet-based automation systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 131B0618 is an AC variable frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. Installed inside a control cabinet, it converts fixed-frequency, three-phase line power into a regulated output that controls induction motor speed in material-handling lines, pump skids, and other automated stations. By combining motor control, network expandability, and integrated filtering in one chassis, the unit supports motion tasks that might otherwise require separate soft starters and contactor logic. Its regulated output allows connected equipment to operate at speeds suited to changing process demands rather than remaining tied to the incoming line frequency.
The drive accepts a supply range of 380–500 VAC, eliminating the need for external step-up or step-down transformers on typical plant power systems. It is built for three-phase power, which balances current draw and minimizes torque pulsation at the load. Continuous shaft output is rated at 2.2 kW, equivalent to 3.0 HP, so the drive is suitable for small compressors, fans, and conveyors. The housing has an IP20 chassis rating; live parts are finger-safe, but the drive must remain inside a panel that provides protection from dust and liquids. The standard cabinet mounting arrangements align the heat sink with common back-panel positions. Standard cable entries accommodate common metric glands without requiring additional drilling.
The A-slot contains a DeviceNet MCA 104 card for CAN-based fieldbus communication with compatible automation equipment. Conducted emissions are limited by the internal RFI Class A1/B (C1) filter, supporting operation in industrial environments without an additional line filter. Local configuration is handled through the Graphical Local Control Panel, while multilingual prompts are provided by the standard language pack. The drive does not contain a brake chopper, so an external braking solution is required when an application demands rapid deceleration. The unit has uncoated printed circuit boards, making a clean, dry control cabinet important for protecting its internal electronics. Proper panel ventilation also allows heat from the drive to move away from the chassis during continuous operation.
