131B0540
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-302P1K5T5E20H1XGXXXXSXXXXAXBXCXXXXD0
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The 131B0540 drive boasts a continuous current of 4.1 A, an apparent power of 2.84 kVA, a compact height of 268 mm, and a calculated net weight of 4.49 kg. Part of the VLT FC 302 Automation Drives series by Danfoss, it offers reliable performance for demanding industrial applications with a power loss of just 62 W.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Danfoss’ VLT FC 302 series presents a variant 131B0540 with height of 268 mm. The vertical dimension defines panel stacking clearances and mounting rail alignment for compact cabinets. This influences cable routing decisions during panel design. Width with no “C” options is 90 mm which narrows the drive footprint and supports denser rack placement in constrained control enclosures. With two “C” options the width extends to 150 mm; thereby allowing additional option cards while preserving predictable cooling paths inside the cabinet.
Its depth measures 205 mm for a shallow depth which simplifies enclosure integration while minimizing protrusion into cabinet airflows. Adding option, ‘A’ or ‘B’ increases depth to 220 mm and that extension accommodates modular accessories without altering front panel access. Continuous current for the module is 4.1A which defines steady state supply demand for thermal management and conductor rating decisions. Also, its Intermittent current reaches to 6.56A and that peak allowance supports short term torque or inrush events while protective settings remain coordinated. An alternate continuous current of value of 3.4A provides a lower steady rating for alternative operating modes while enabling recalibrated protection thresholds.
The 131B0540 specifies an intermittent current of 5.44 A which permits short duration input surges for dynamic loads while protection logic handles recovery. Power loss is 62 W and it quantifies dissipation guides ventilation selection and thermal rise calculations inside the enclosure. Apparent power registers 2.84 KVA for a combined active and reactive supply demand for upstream distribution and transformer considerations. Calculated gross weight is 5.336 kg and that mass figure informs shipping brackets and lifting method planning for installation. Its calculated net weight equals to 4.49 kg and this net mass supports final load calculations for support rails and mounting fasteners.
Frequently Asked Questions about 131B0540:
Q: How does the continuous current value guide electrical design for 131B0540?
A: Continuous current (ho) for the unit is 4.1 A and it represents the steady current demand during normal operation.
Q: How does the height requirement affect cabinet layout for 131B0540?
A: Its height is 268 mm and that defines the vertical clearance required inside an enclosure. This measurement governs stacking arrangements and vertical airflow planning.
Q: What influence does the narrow width with no C options have for 131B0540?
A: The drive’s width with no C options is 90 mm and it sets the minimal lateral footprint for the module.
Q: What does the base depth imply for enclosure integration of 131B0540?
A: Its depth of 205 mm represents how far the module projects into a cabinet. This depth guides mounting depth clearance and rear connector access.
Q: How does adding two C options change space planning for model 131B0540?
A: This automation device’s width with two C options is 150 mm that establishes the expanded lateral envelope when option cards are fitted.
