131B0497 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-302PK37T5E20H1XXXXXXSXXXXA0BXCXXXXDX
The Danfoss 131B0497 is part of the VLT FC 302 Automation Drives series and is designed for three-phase power with a mains voltage between 380 and 500 VAC. It has a power rating of 0.37 kW (0.50 HP) and mounts in a normal cabinet. The drive features IP20 protection, a standard RFI Class A1/B filter, and includes a PROFIBUS DP V1 MCA 101 option.
Internal Product Review
The 131B0497 is a Danfoss VLT FC 302 automation drive built for precise motor control on 380 - 500 VAC three-phase power. PROFIBUS DP V1 MCA 101 communication and an RFI Class A1/B (C1) filter support clean integration in automated cabinet systems. A 0.37 kW rating makes the unit an excellent fit for efficient light-duty automation service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 131B0497 is an AC variable frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. It serves as a cabinet-mounted controller that converts fixed-frequency, three-phase mains power into a modulated output for accurate motor control. This capability allows the drive to regulate the speed of induction motors used in industrial automation lines, conveyors, and pump systems. The controller is designed for installation in an electrical cabinet with suitable protection and ventilation.
This drive delivers a continuous mechanical output of 0.37 kW, which corresponds to 0.50 HP at the motor shaft. It accepts supply power ranging from 380 to 500 VAC and is designed exclusively for three-phase power networks. The enclosure has an IP20 chassis rating, so the unit must be installed inside a protected electrical panel. Standard cable entries simplify power, motor, and control wiring within the cabinet. The internal printed circuit boards are uncoated, allowing heat to dissipate under normal plant conditions. The unit does not include a brake chopper, so braking energy cannot be routed to a connected chopper resistor. It belongs to the VLT AutomationDrive FC product group and carries the internal series identifier 302.
Field integration is handled through the factory-installed PROFIBUS DP V1 MCA 101 interface, enabling real-time setpoint exchange and diagnostic communication with upstream PLCs. An integrated RFI Class A1/B (C1) filter reduces radio-frequency interference and supports use in industrial electrical environments. The hardware uses normal cabinet mounting for A, B, and C frames, allowing it to fit the corresponding panel layout and heat sink clearances. Adaptation boards and B, C0, C1, C, and D option boards are not installed. The drive also does not include a mains option or a local control panel, so commands and operating data must be exchanged through the network or compatible remote service tools. A standard language pack supports the available operating interface and related configuration resources.
