131B0487 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-302P7K5T5E20H1BGXXXXSXXXXA0BXCXXXXDX
The Danfoss 131B0487 is part of the VLT FC 302 Automation Drives series with a power rating of 7.5 kW and supports three phase power at 380 to 500 VAC. This drive includes a brake chopper, standard cable entries, and is designed for normal cabinet mounting. It features a graphical local control panel, an IP20 protection level, and includes an integrated PROFIBUS DP V1 MCA 101 option.
Internal Product Review
The 131B0487 is a Danfoss VLT FC 302 automation drive built for 7.5 kW service on 380 to 500 VAC systems. PROFIBUS DP V1 connectivity and a Graphical Local Control Panel support efficient commissioning and dependable network integration. Brake chopper functionality and IP20 chassis protection make the drive a strong choice for demanding panel installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 131B0487 is an AC variable frequency drive produced by Danfoss as part of the VLT FC 302 Automation Drives series. The unit converts fixed-frequency mains power into a regulated output for induction motors used in industrial automation. It is suitable for midrange pumping, conveying, and material-handling tasks that benefit from adjustable motor speed. Its control functions allow connected machinery to operate at the speed required by the process rather than continuously running at full output.
The drive is rated at 7.5 kW, which corresponds to a shaft capacity of 10 HP under nominal load. Its input section accommodates 380–500 VAC supplies and is wired for three-phase power, eliminating the need for external phase conversion. The chassis-style enclosure has an IP20/chassis rating, so the drive must be installed inside a grounded cabinet that prevents unintended contact with internal components. Standard cabinet-mounting hardware for A, B, and C frames is provided, and the housing includes standard cable entries for organized power and control wiring. The integrated brake chopper supports rapid motor deceleration by directing regenerated energy to a suitable braking resistor. The printed circuit boards are not coated, so the cabinet should provide a clean, dry operating environment with adequate protection from moisture and airborne contaminants.
The factory-installed PROFIBUS DP V1 MCA 101 interface enables cyclic data exchange with compatible PLCs and automation controllers. Parameter access is also available through the Graphical Local Control Panel, allowing settings and operating values to be viewed directly at the drive. An RFI Class A1/B (C1) filter suppresses conducted electrical noise on the motor and mains leads to support electromagnetic compatibility. A standard language pack is preloaded for access to menus, status information, and parameter descriptions. The modular control design supports option cards when an application requires additional communication or control functions. Normal cabinet airflow should be maintained around the chassis to remove heat generated by the power electronics during continuous operation.
