131B0457 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-302P5K5T5E20H1XGXXXXSXXXXA0BXCXXXXDX
The Danfoss 131B0457 is part of the VLT FC 302 Automation Drives series and has a power rating of 5.5 kW with support for three phase power at 380 to 500 VAC. It features an IP20 chassis protection level, a graphical local control panel, and is equipped with a PROFIBUS DP V1 MCA 101 option. This drive is designed for standard cabinet mounting and has a built-in RFI Class A1/B filter.
Internal Product Review
The 131B0457 is a Danfoss VLT FC 302 automation drive with a 5.5 kW rating for 380 to 500 VAC systems. PROFIBUS DP V1 communication and a graphical local control panel support efficient integration and straightforward setup. IP20 chassis protection and normal cabinet mounting make the unit a strong fit for enclosed automation panels.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 131B0457 is an AC variable frequency drive manufactured by Danfoss for the VLT FC 302 Automation Drives series. As a member of the VLT AutomationDrive FC product group, the unit converts fixed-frequency mains power into a controlled output that allows control systems to adjust induction motor speed according to process demand. Installing the drive inside a cabinet provides electronic speed regulation without mechanical throttling, which can improve efficiency in conveyors, pumps, and other continuous-duty automation systems. Its control architecture supports applications that require accurate motor operation, consistent process control, and communication with a higher-level automation network.
Its continuous output is rated at 5.5 kW, which corresponds to 7.5 HP and makes the drive suitable for medium-frame induction motors. The input section accepts 380–500 VAC from three-phase power, providing compatibility with common industrial supply networks. An A-slot PROFIBUS DP V1 MCA 101 card connects the inverter directly to compatible PLC networks for command, status, and diagnostic data exchange. The drive does not include a brake chopper, so rapid deceleration may require an appropriate external braking arrangement. Standard cable entries provide practical routing for power and control conductors inside the enclosure. The printed circuit board is uncoated, so the installation environment should limit exposure to moisture, conductive dust, and corrosive airborne contaminants. Frames A, B, and C support normal cabinet mounting with adequate clearance for ventilation and wiring access.
The chassis has an IP20 enclosure rating, so the drive must be installed inside a closed panel that prevents accidental contact while allowing sufficient ventilation. Conducted electrical noise is reduced by a built-in RFI Class A1/B (C1) filter, which helps limit interference on the connected supply network. Local setup and monitoring are performed through the Graphical Local Control Panel, which presents readable text menus, operating values, and trend information. The panel gives direct access to motor settings, operating commands, alarm records, and drive status without requiring a separate display device. PROFIBUS communication allows operating commands and process data to be exchanged with the automation controller while the local panel remains available for on-site observation and parameter access.
