131B0152 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss 131B0152 belongs to the VLT FC 302 Automation Drives series and features a power rating of 7.5 kW with continuous apparent power of 11.6 kVA at 460 V. It is equipped with a graphical local control panel, supports three-phase input voltage from 380 to 500 VAC, and has an IP20 enclosure rating. The drive operates with an efficiency of 0.97 and a continuous output current of 14.5 A at 441 to 500 V.
Internal Product Review
The 131B0152 is a Danfoss VLT FC 302 automation drive rated at 7.5 kW for 380-500 VAC systems. Operation is efficient and well suited for panel installations, with 0.97 efficiency and an IP20 enclosure. The graphical LCP adds practical commissioning value, making this unit a strong choice for consistent drive control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 131B0152 is an AC variable frequency drive produced by Danfoss as part of the VLT FC 302 Automation Drives series. This converter regulates the speed of three-phase induction motors by converting fixed-frequency mains power into a pulse-width-modulated output. It is used with pumps, fans, and conveyor sections where accurate speed control and reduced energy consumption are required. The compact housing mounts inside a cabinet and provides full parameter access through a detachable keypad.
It accepts a three-phase supply between 380–500 VAC and delivers a continuous motor output of 7.5 kW within this range. The continuous motor current is 14.5 A, while the converter’s apparent input demand reaches 11.6 kVA at 460 V. Its operating efficiency is 0.97, reducing wasted energy and easing panel cooling requirements. The housing has an IP20 protection rating, so the unit must be installed in a clean, ventilated enclosure. The A3 frame size conserves cabinet space, while the conformally coated printed circuit board provides resistance to moisture. A graphical local control panel serves as the local control interface and provides access to operating parameters. The drive does not include a brake chopper, making it suitable for applications that do not require regenerative braking.
During acceleration or brief overloads, the drive can supply 23.2 A to the motor, providing a margin for typical startup peaks. Internal dissipation rises under these conditions, but the estimated heat loss is limited to 255 W, which can be used to determine enclosure ventilation needs. Compliance with EN 55011 Class A2 supports electromagnetic compatibility in industrial installations. Upstream protection is straightforward because the maximum mains current is 13 A and the recommended line fuse is a 32 A gG fuse. Interference-suppression components are included on the coated circuit board to reduce conducted electrical noise. The three-phase rectifier operates without derating across the 441–500 V range associated with the intermittent current rating.
