131B0082
Wake Industrial LLC is not an authorized distributor of this product.
MPN: FC-302P7K5T5E20H2XGXXXXSXXXXAXBXCXXXXDX
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The 131B0082 drive offers a power rating of 7.5 kW, a rated current of 16 A, an IP20 enclosure rating, and can operate within a temperature range of -25 to +50 °C. Designed as part of the VLT FC 302 Automation Drives series by Danfoss, it supports a main supply voltage of 380-500 V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Danfoss 131B0082 automation drive uses shielded or armored control cables. This drive’s commissioning can be done easily by using the smart application setup. The product operates with a supply voltage of 380 VAC to 500 VAC with +/-10% tolerance. This device can function with a full continuous output current at up to 45 °C. The unit has significant power losses when the switching frequency is set to higher than the default setting. Its alarm LED is in the flashing state when a trip load is encountered. This drive highlights a Motor thermistor overtempt error on the display if its thermistor is disconnected.
The product should be cooled to its operating temperature if a high voltage error is highlighted. This unit can’t be installed in a horizontal orientation. It can cause personnel injury if it is worked on without discharging the DC-link capacitors. This drive requires additional wiring to execute the STO function. The product’s external fuses should be checked for the correct rating if it has no built-in fuses. This device is delivered with the plinth for positioning it at the installation site. The unit needs a measuring tape, a wrench with the related metric sockets, and a lifting bar for its installation. Its installation should ensure there is sufficient space before the drive so that the front door can be opened.
This automation drive’s cables have to be encased in metallic conduits. The product is cooled by a fan in a Rittal TS8 enclosure. This device may trip if the gland plate has not been mounted. The unit’s residual current system monitors the ground fault currents using the core balance method in grounded systems. It has a rugged construction.
Frequently Asked Questions about 131B0082:
Q: How can the analog input terminals of the 131B0082 drive be configured?
A: The analog input terminals of the 131B0082 drive can be configured as current or voltage inputs.
Q: How should the 131B0082 drive be connected with the motor?
A: The 131B0082 drive should be connected with the motor according to the connection type given in the nameplate of the motor.
Q: How must the motor connection be done when multiple motors are used with the 131B0082 drive?
A: The motors must have a parallel connection when multiple motors are used with a single 131B0082 drive.
Q: What kind of motor is the 131B0082 drive compatible with?
A: The 131B0082 drive is compatible with induction motors.
Q: What kind of display does the local control panel of the 131B0082 drive have?
A: The local control panel of the 131B0082 drive has a graphical display with status lines.
