FC321P7K5T2P66H2BGXXSXSXXXXANB Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC321P7K5T2P66H2BGXXSXSXXXXANB is part of the VLT EZ FC 321 Automation Drives series and weighs 23 kg. This drive features an IP66 enclosure rating and operates with an input voltage of 3 x 200-240 V AC. It provides a normal-overload output current of 46.2 A with a power rating of 11 kW, and includes an EtherNet/IP MCA 121 fieldbus option.
Internal Product Review
The FC321P7K5T2P66H2BGXXSXSXXXXANB is a Danfoss VLT EZ FC 321 automation drive built for 3 x 200-240 V AC service with IP66 enclosure protection. EtherNet/IP MCA 121 communication and an installed brake IGBT support clean integration and dependable deceleration control in demanding machinery. High-overload performance at 7.5 kW and 30.8 A makes the drive a strong choice for compact automation packages.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC321P7K5T2P66H2BGXXSXSXXXXANB is an AC variable frequency drive produced by Danfoss for the VLT EZ FC 321 Automation Drives series. The unit belongs to the broader VLT AutomationDrive EZ product group. It converts fixed-frequency mains power into a regulated output that allows a controller to adjust motor speed and torque. This functionality supports variable-speed operation in conveyors, pumps, material-handling systems, and other automated equipment.
The drive operates from a three-phase supply of 3 x 200-240 V AC. For constant-torque loads, it provides a normal-overload output of 11 kW at 46.2 A. Output current can rise to 50.8 A for 60 seconds to support short acceleration periods. A separate high-overload profile provides 7.5 kW at a continuous output current of 30.8 A, with a maximum current of 49.3 A for brief peaks. The integrated brake IGBT controls the dissipation of regenerated energy through compatible braking hardware, while the built-in RFI filter meets A2 (C3) limits for conducted emissions. Network communication is provided by an EtherNet/IP MCA 121 option card, allowing the drive to exchange setpoints, operating data, and status information with a PLC. Standard Adaptation A cable entries simplify field wiring, and the electronics do not have a conformal coating, making the drive appropriate for clean installation areas.
The molded enclosure has an ingress protection rating of IP66, providing protection against dust and high-pressure water jets when the drive is installed near machinery. The housing measures 480 mm high and 242 mm wide, with a depth of 260 mm for wall or machine-frame installation. Its total mass is 23 kg, so suitable mounting brackets and handling equipment should be used during installation. The drive does not include a local control panel, so operating parameters and commands are accessed through remote tools or the connected host network. Internal airflow channels remove heat from the electronic assemblies during operation. The enclosure also accommodates the thermal load produced by the brake transistor while maintaining protection for the internal components.
