FC202P7K5T4131X9647 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC202P7K5T4131X9647 is part of the VLT FC 202 AQUA Drives series and delivers a rated power of 7.5 kW or 10 horsepower with an efficiency of 0.97. This drive handles a continuous output of 11.6 kVA at 460 V and supports both shielded and unshielded motor cables up to 150 m and 300 m, respectively. It is tested for 1.0 g vibration and operates at altitudes up to 1000 meters without derating.
Internal Product Review
The FC202P7K5T4131X9647 is a Danfoss VLT AQUA drive rated at 10 hp and 7.5 kW. A 5 ms control card scan interval and 0.97 efficiency support responsive, energy-conscious operation in demanding pump and fan applications. Long cable capability up to 300 m unshielded and 150 m shielded is a strong advantage for flexible installation planning.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC202P7K5T4131X9647 is an AC variable frequency drive produced by Danfoss within the VLT FC 202 AQUA Drives series. Classified in the VLT AQUA Drive product group, it is built to control centrifugal pumps, blowers, and filtration motors used in water-treatment or process-circulation lines. By converting three-phase mains power into a controlled output frequency, the unit allows automation systems to regulate flow and pressure without mechanical throttling, improving energy use and extending equipment life.
At the motor terminals, the inverter delivers a nominal output of 7.5 kW, corresponding to 10 HP when driving standard induction motors. The power stage can sustain 11.6 kVA of apparent load on a 460 V supply, and upstream circuit protection should match the 30 A prefuse rating. Overall conversion efficiency is 0.97, so only a small fraction of the input energy is dissipated as heat. These electrical margins provide operating capacity for the changing inlet pressures and high-inertia loads common in pump stations. The internal IGBT bridge tolerates the thermal cycling caused by high-inertia loads without exceeding its junction temperature limits. This capability supports variable-speed operation during frequent changes in pump demand.
The drive control card has a 5 ms scan interval, enabling responsive PID loops for level regulation. Status contacts follow PLC conventions: command lines accept 28 V DC signals, and the transistor output can source up to 40 mA to operate beacons or small relays. Heat generation under full load is limited to 225 W, which simplifies panel ventilation design. The unit operates without derating at elevations up to 1000 m and can continue running with a linear current reduction at elevations up to 3000 m. It accommodates shielded motor leads up to 150 m long or unshielded motor leads up to 300 m long, supporting remote well or reservoir installations. The unit withstands vibration levels up to 1.0 g, making it suitable for skid-mounted or rooftop equipment.
