FC-202PK75T6135X1517 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202PK75T6135X1517 is a 1.0 HP drive in the VLT FC 202 AQUA Drives series with a power rating of 0.75 kW and continuous input current of 1.7 A. It delivers an efficiency of 0.97 and is classified as IE2 energy efficiency class. The drive operates with three-phase power and supports operation up to 1000 meters altitude without derating.
Internal Product Review
The FC-202PK75T6135X1517 is a Danfoss VLT FC 202 AQUA drive rated for 0.75 kW and three-phase power. An efficiency of 0.97 and an IE2 energy efficiency class support economical operation in water and process applications. Operation up to 50 °C and 95% relative humidity makes the drive a strong choice for demanding installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202PK75T6135X1517 is an AC variable-frequency drive produced by Danfoss within the VLT FC 202 AQUA Drives series. Designed for pump and fan duties, it modulates induction motor speed to match real-time flow requirements in water and wastewater installations. By converting fixed-frequency three-phase mains power into a regulated output waveform, the drive can reduce energy consumption and mechanical stress while supporting PLC-based process automation. Adjusting motor speed according to demand also reduces the need for mechanical throttling in variable-flow systems.
During continuous operation, the drive draws 1.7 A from the supply, a value that establishes the minimum rating for upstream contactors and wiring. Its motor output is rated at 0.75 kW, which corresponds to 1.0 HP for installations that use imperial units. Conversion efficiency reaches 0.97, so only a small share of the input power is lost as heat under rated load. The drive is assigned to efficiency class IE2, placing it above basic standard drives and aligning it with energy-saving directives. Three-phase power connectivity and a sinusoidal pulse-width modulation stage allow constant-torque and variable-torque pump operation without mechanical throttling.
The drive can be mounted at elevations up to 3000 m above sea level when current derating is applied, while full power is maintained at elevations up to 1000 m. Ambient air may reach 50 °C without forced cooling, and operation at full load is permitted down to 0 °C. Relative humidity can reach 95% without condensation. A line fuse rated at no more than 10 A protects the input rectifier. The disconnect terminals accept conductors up to 6 mm², while the motor terminals accept conductors up to 4 mm². Under rated conditions, internal power losses are 35 W, and cabinet ventilation must be sufficient to remove the resulting heat.
