FC-202PK75T6134H0702 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202PK75T6134H0702 is part of the VLT FC 202 AQUA Drives series and offers a power rating of 0.75 kW with a 1.0 HP output. It operates with three-phase power, has an efficiency of 0.97, and a frequency output maximum of 32 kHz. The drive provides a maximum ambient operating temperature of 50 °C and supports digital inputs up to 28 V DC.
Internal Product Review
The FC-202PK75T6134H0702 is a Danfoss VLT FC 202 AQUA Drive optimized for precise pump and fan duty. Efficiency rated at 0.97 and speed accuracy of ±8 RPM support notably stable process control with low energy waste. A 2 ms response time and 50 °C maximum ambient capability make the drive a strong choice for fast, dependable operation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202PK75T6134H0702 is a variable frequency drive manufactured by Danfoss and assigned to the VLT FC 202 AQUA Drives series. It is installed between the three-phase supply and an induction motor so that pump or fan speed can be adjusted to the required flow rate or pressure in water-handling processes. By regulating output frequency and voltage, the drive helps reduce hydraulic shock, lower electrical energy use, and improve process accuracy in municipal and industrial automation.
Electrical loading is limited to an apparent power of 1.7 kVA at 550 V and a continuous input current of 1.7 A; these limits guide cable sizing and upstream circuit breaker selection. Control terminals accept digital command signals up to 28 V DC and can source status feedback currents of up to 40 mA, allowing direct interfacing with PLC I/O cards. Overall conversion efficiency is 0.97, so nearly all incoming energy reaches the motor rather than being lost as heat. The motor output is rated at 0.75 kW, which corresponds to 1.0 HP. A 10 A pre-fuse protects the drive against short-circuit events. Motor speed changes are reflected at the terminals within a response time of 2 ms, and closed-loop regulation maintains speed within ±8 rpm. At 550 V, the output current capacity is 1.8 A, while operation on 600 V mains is limited to 1.7 A.
High-frequency pulse-width modulation reaches 32 kHz, enabling low acoustic noise on high-speed motors. Under full load, the drive dissipates only 35 W, keeping enclosure cooling requirements modest even when the ambient temperature reaches 50 °C. Shielded motor cables can be routed up to 150 m without violating electromagnetic compatibility limits, and the unit’s three-phase topology ensures balanced current draw across all supply lines.
