FC-202PK75T6131L2989 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The FC-202PK75T6131L2989 is a three phase drive manufactured by Danfoss and is part of the VLT FC 202 AQUA Drives series. It has a power rating of 0.75 kW, an efficiency of 0.97, and a continuous output current of 1.7 Amps at 551-600 V. The drive supports a maximum ambient temperature of 50 °C and can handle a maximum pre-fuse of 10 Amps.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202PK75T6131L2989 is a variable frequency inverter manufactured by Danfoss for the VLT FC 202 AQUA Drives series. The unit provides speed control for centrifugal pumps and blowers used in municipal and industrial water-handling systems. It accepts three-phase mains power and delivers a modulated output that follows changes in motor load. This electronic control allows pressure or flow to be regulated without relying solely on mechanical valves, dampers, or other restrictive devices. Its control architecture supports applications that require stable pump operation under varying process conditions.
At the motor terminals, the drive supplies a nominal power of 0.75 kW, which is equal to 1.0 HP for installations that use imperial units. When connected to a 550 V supply, it provides a continuous apparent power of 1.7 kVA and a continuous output current of 1.7 A. During startup or rapid load changes, the inverter can deliver up to 2.6 A for short periods. The maximum input current is 1.7 A, and the three-phase supply must be protected by a 10 A gG fuse or an equivalent protective device. Cable lugs can be crimped onto conductors with cross-sectional areas up to 4 mm². Disconnect blocks can accommodate conductors with cross-sectional areas up to 6 mm² without placing excessive mechanical stress on the terminals.
The drive’s internal IGBT stage operates with an efficiency of 0.97, limiting heat loss under rated operating conditions. It releases approximately 35 W of heat into the control cabinet, so adequate airflow must be maintained across the heat sink. The inverter can operate continuously in ambient air temperatures up to 50 °C without derating when the required airflow is available. Control electronics refresh process data every 5 ms, enabling prompt responses to changing pressure, flow, or speed commands. The analog output can support a load resistance of up to 500 Ω, while the digital outputs can sink up to 40 mA for connected relays or indicators. Appropriate conductor sizing and cabinet ventilation help maintain stable electrical and thermal operation throughout the intended load range.
