FC-202PK75T2134F6395 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202PK75T2134F6395 is part of the VLT FC 202 AQUA Drives series and offers a power rating of 0.75 kW with a horsepower of 1.0 HP. It operates with a continuous output current of 4.6 A and supports a mains voltage range of 200 to 240 VAC. The drive features an efficiency rating of 0.95 and is suitable for use up to 1000 meters altitude without derating.
Internal Product Review
The FC-202PK75T2134F6395 is a Danfoss VLT FC 202 AQUA drive designed for efficient motor control on 200 - 240 VAC three-phase power. A 0.75 kW rating paired with 0.95 efficiency supports dependable performance in compact pumping and water-handling applications. A 590 Hz maximum output frequency stands out as a strong advantage for flexible speed regulation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Danfoss manufactures the FC-202PK75T2134F6395 drive for the VLT FC 202 AQUA Drives series. This three-phase variable-frequency converter is tailored for pumps and blowers in water treatment and irrigation systems, providing speed regulation for 0.75 kW (1 HP) induction motors connected to a 200–240 VAC power supply. By modulating the output frequency, it allows control systems to match flow or pressure requirements without mechanical throttling, which reduces energy consumption and wear on valves and other mechanical components. The converter is suitable for variable-torque applications that require consistent motor control as process demand changes.
The input section draws a continuous current of 4.1 A and requires 1.66 kVA when supplied with 208 V, allowing upstream conductors and protective devices to be sized for the connected load. At the inverter terminals, the unit delivers 4.6 A of continuous output current, providing the motor with the current needed to reach nominal torque across its operating range. Conversion losses are limited, resulting in an overall efficiency of 0.95 and a rated power loss of 54 W that must be removed through cabinet ventilation. The drive supports a maximum output frequency of 590 Hz, accommodating motors that require an elevated electrical frequency. A line fuse rated at 10 A provides protection against short-circuit events. The drive meets IE2 energy-efficiency class requirements and carries the internal series identifier 202 within the VLT AQUA Drive group.
The drive operates without derating at ambient temperatures up to 50 °C and at elevations up to 1000 m. Shielded motor cables may extend up to 150 m while maintaining electromagnetic compatibility, and the controller permits a maximum of 2 power-ups per minute to protect its electrolytic capacitors from excessive charging cycles. Field wiring supports disconnect-switch conductors with copper cross sections up to 6 mm², while the motor terminals accept conductors up to 4 mm². These conductor capacities allow the connections to carry the drive’s rated current over the permitted cable length. Proper cabinet airflow is required to remove operating heat and maintain the available output under continuous load.
