FC-202PK75T2134F6388 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202PK75T2134F6388 belongs to the VLT FC 202 AQUA Drives series and has a power rating of 0.75 kW, delivering 1.0 HP with an efficiency of 0.95. This three-phase drive supports a supply voltage of 200 to 240 VAC, continuous output current of 4.6 A, and a maximum shielded motor cable length of 150 meters. It operates at a supply frequency of 50 or 60 Hz and can handle output frequencies from 0 to 590 Hz.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202PK75T2134F6388 is an AC variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. The unit converts fixed-frequency mains electricity into a variable-frequency output so that centrifugal pumps, blowers, or mixers can operate at the speed required for water and wastewater processes. Through closed-loop motor control, the drive helps automation systems maintain flow, level, or pressure without relying on mechanical throttling. This method can reduce unnecessary motor operation when process demand falls below the maximum capacity of the connected equipment.
Its electrical frame has a power rating of 0.75 kW, which corresponds to 1.0 HP and is suitable for small induction motors used in localized pumping stations. The input section accepts three-phase supplies from 200-240 VAC, and the drive draws a continuous line current of 4.1 A within this voltage range. Internally, a pulse-width-modulated inverter produces an output frequency that can be adjusted from 0-590 Hz, allowing oversynchronous operation when required by the process. The drive has an efficiency of 0.95, so most incoming power reaches the motor rather than being dissipated as heat. This efficiency helps control temperature rise inside an electrical cabinet during extended operation.
For downstream integration, the inverter delivers a continuous motor current of 4.6 A and supplies up to 1.66 kVA of apparent power, providing the necessary values for cable sizing and protective device selection. Total power loss is rated at 54 W, so standard panel ventilation is generally sufficient when the surrounding air remains below 50 °C. Ramp times are adjustable from 1 second to 3,600 seconds, allowing acceleration and deceleration to be matched to the hydraulic response of the connected system. The drive supports shielded motor cables up to 150 meters long and has a true power factor of at least 0.9. It is also compatible with 50/60 Hz utility grids that may vary by +4% or -6%, accommodating common fluctuations in industrial power networks.
