FC-202PK75T2131G9670 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202PK75T2131G9670 is a VLT FC 202 AQUA Drives series variable frequency drive with a power rating of 0.75 kW and delivers 1.0 horsepower. It operates on three-phase 200 to 240 VAC mains voltage and has an input current of 4.1 amps. The drive achieves an efficiency of 0.95 and supports a maximum ambient temperature of 50°C.
Internal Product Review
The FC-202PK75T2131G9670 is a Danfoss VLT FC 202 AQUA drive rated at 0.75 kW for three-phase power applications. Efficient 0.95 performance and a 50 °C ambient temperature capability make this drive a strong fit for demanding process control. Flexible installation support stands out with motor cable allowances up to 150 m shielded and 300 m unshielded.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202PK75T2131G9670 is an AC variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. Designed as a pump-oriented controller, the unit converts three-phase mains power into a regulated output that responds to changing flow demands in water and wastewater systems. The drive adjusts motor speed to maintain the pressure or flow required by the process rather than relying on throttling valves. This method can reduce unnecessary energy consumption in filtration systems, irrigation equipment, pumping stations, and municipal supply networks. Its control functions also allow connected pumps to accelerate and decelerate smoothly as demand changes, reducing abrupt mechanical stress on the motor and piping.
The drive accepts a three-phase supply within the 200–240 VAC range and draws an input current of 4.1 A at full load. Its inverter supplies a maximum motor current of 4.6 A to support controlled pump operation. The motor output is rated at 0.75 kW, which corresponds to a mechanical shaft capability of 1.0 HP. This output level allows the device to start and regulate small centrifugal pumps without requiring an unnecessarily large drive. The apparent power demand is 1.66 kVA, which assists with the selection of compatible upstream electrical equipment. A 10 A pre-fuse is recommended to interrupt fault current and protect the incoming power circuit.
At ambient temperatures up to 50 °C, the inverter maintains an operating efficiency of 0.95. Its energy-performance class is IE2, and normal operation produces approximately 54 W of heat that cabinet ventilation must remove. Shielded motor cables can extend to 150 m, allowing the drive to be installed at a distance from pumps in remote equipment rooms. Unshielded motor cable runs may reach 300 m when the installation does not require the additional electromagnetic protection provided by shielding. The controller delivers its rated output without current derating at elevations up to 1,000 m. With linear current reduction applied at higher elevations, the unit can continue operating at locations up to 3,000 m above sea level.
