FC-202PK55T4131Z8133 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202PK55T4131Z8133 is part of the VLT FC 202 AQUA Drives series and operates with a power rating of 0.55 kW and a horse power of 0.75 HP. It supports three phase power with a mains voltage range of 380 to 480 VAC and has an efficiency of 0.95. This drive allows a maximum ambient temperature of 50 °C, a max relative humidity of 95%, and can operate at altitudes up to 1000 meters without derating.
Internal Product Review
The FC-202PK55T4131Z8133 is a Danfoss VLT FC 202 AQUA drive rated for 0.55 kW on 380–480 VAC mains. Three-phase power architecture and 0.95 efficiency support clean, stable operation in pump and fan duty. Long motor lead capability up to 150 m shielded or 300 m unshielded makes the unit an excellent fit for flexible industrial installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202PK55T4131Z8133 is an AC variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. As a member of the VLT AQUA Drive product group, it converts fixed-frequency three-phase mains power into a modulated output that allows pumps, aerators, and other water-handling equipment to run at the precise speed demanded by process controllers. By regulating motor torque rather than relying on mechanical throttling, the unit helps automation systems in treatment plants and distribution networks improve energy use and reduce hydraulic transients.
With a mains voltage range of 380–480 VAC, the drive connects directly to three-phase power grids without transformers. Continuous input demand at 380–440 V is 1.6 A, which corresponds to 1.3 kVA of apparent power when measured at 400 V. On the same supply range, it delivers a continuous output current of 1.8 A, while the rating at 441–480 V is 1.6 A. This output is sufficient to run motors rated up to 0.55 kW or 0.75 HP. An efficiency of 0.95 keeps power loss to 42 W, limiting cabinet heating and simplifying thermal management. A maximum prefuse value of 10 A protects the installation against short-circuit faults. Cable terminals accept conductors up to 4 mm², while disconnect lugs can accommodate conductors up to 6 mm².
Operation is supported at elevations up to 1000 m above sea level without derating. Ambient air may reach 50 °C when airflow through the heat sink is maintained. The enclosure tolerates relative humidity up to 95% when condensation is prevented, supporting operation in humid pump rooms. Shielded motor leads can extend up to 150 m, while unshielded motor leads can extend up to 300 m. These cable lengths allow the inverter to be installed in a control room away from wet areas while maintaining its connection to the motor.
