FC-202PK55T2131B9130
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The FC-202PK55T2131B9130 drive works on a three-phase system with a power rating of 0.55 KW. Manufactured by Danfoss and a part of the VLT AQUA Drive FC 202 series, it is suitable for mains voltages of 380-480 VAC and features an IP20 chassis enclosure. It includes a graphical local control panel.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202PK55T2131B9130 is a valuable variable frequency converter manufactured by Danfoss under the elite VLT HVAC product series. Boasting a protective enclosure and a highly efficient 202 drive, this unit is perfect for variable adjustment of 3-phase motors during operation. Aside from providing the user a platform for adjusting important motor parameters during operation, it also serves as a protection system for preventing high current faults from damaging the motor permanently. During operation, the FC-202PK55T2131B9130 can safely achieve a shaft output of 0.55 kilowatts (0.75 horsepower) at a mains voltage of 200 to 240 VAC.
At high overload, the FC-202PK55T2131B9130 can safely deliver a continuous and intermittent output current of 3.5 and 5.3 amperes, respectively. At the same operating point, the maximum continuous and intermittent currents across the frequency converter are 3.2 and 4.8 amperes, respectively. In no-overload mode, the output and input current values decrease. Particularly, below 50 degrees Celsius, the intermittent output and input current values are 3.9 and 3.5 amperes, accordingly. To safely support the FC-202PK55T2131B9130’s current values, the cable cross-section for the mains and motor must be at most 4 square millimeters. At the maximum load level, the estimated power loss is around 42 watts.
Like all other frequency converters designed by Danfoss, the FC-202PK55T2131B9130 exhibits high efficiency and reliability. Assuming a maximum power loss of 42 watts, this variable drive achieves an efficiency of around 95 percent. Based on the FC-202PK55T2131B9130’s official datasheet, the motor’s output voltage can reach as high as 100% of the mains supply, while the frequency can reach a value in the range of 0 to 590 hertz. In high-overload mode, the motor’s starting and steady-state torque can reach up to 150 or 160% of the rated value.
Frequently Asked Questions about FC-202PK55T2131B9130:
Q: What are the maximum motor cables supported by the FC-202PK55T2131B9130?
A: For shielded motor cables, the FC-202PK55T2131B9130 can support a maximum length of 150 meters. For unshielded cables, the maximum length can reach up to 300 meters.
Q: What serial communication does the FC-202PK55T2131B9130’s control card use?
A: The FC-202PK55T2131B9130’s control card uses RS485 serial protocol for establishing communication.
Q: What terminals correspond to the analog inputs for the FC-202PK55T2131B9130?
A: Terminals 53 and 54 are commonly designated as the analog inputs for FC-202 converters by Danfoss.
Q: What is the maximum input resistance across the FC-202PK55T2131B9130’s analog terminals?
A: The maximum input resistance across the FC-202PK55T2131B9130’s analog terminals is approximately 200 ohms.
Q: What terminal corresponds to the FC-202PK55T2131B9130’s analog output?
A: Terminal 42 of the FC-202PK55T2131B9130 is commonly assigned as the programmable analog output.
