FC-202PK25T2136H9359 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202PK25T2136H9359 belongs to the VLT FC 202 AQUA Drives series and operates on a mains voltage of 200 to 240 VAC in three phase power. It provides a typical shaft output of 0.25 kW, rated horsepower of 0.34 hp, and achieves an efficiency of 0.94. The drive supports a continuous output current of 1.8 A and features an analog output accuracy of 0.8% full scale.
Internal Product Review
The FC-202PK25T2136H9359 is a Danfoss VLT FC 202 AQUA drive designed for dependable control on 200 - 240 VAC three-phase power. An efficiency rating of 0.94 and continuous output current of 1.8 A give the drive a very capable balance of energy performance and stable operation. The 0.25 kW typical shaft output makes the drive an excellent fit for light-duty pumping and fan applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202PK25T2136H9359 is an adjustable frequency drive manufactured by Danfoss within the VLT FC 202 AQUA Drives series. Designed for pump and fan applications in water-handling installations, the unit regulates the speed of three-phase induction motors to match changing flow or pressure demands. Integration with level, pressure, or flow controllers can reduce energy consumption while limiting mechanical stress on pipelines, seals, and connected equipment. The drive occupies a compact area in an automation cabinet and connects directly to a compatible low-voltage distribution board.
The drive accepts a three-phase mains supply of 200 to 240 VAC and draws a continuous input current of 1.6 A at rated load. It processes an apparent power of 0.65 kVA at 208 V and delivers a continuous output current of 1.8 A to the motor terminals. The typical shaft output is 0.25 kW, making the drive suitable for small centrifugal pumps used in booster systems and similar water applications. Its conversion efficiency is 0.94, resulting in approximately 21 W of heat loss at full load and allowing the unit to use simple convection cooling. The incoming feeder requires a 10 A upstream fuse for circuit protection. The line terminals accept conductors up to 4 mm², while the disconnect terminals accommodate conductors up to 6 mm².
Control signals are managed through isolated input and output channels. The analog output provides speed or process feedback with an accuracy of 0.8% of full scale and an 8-bit resolution, and it can drive loads down to 500 Ω without additional buffering. Digital commands such as start, stop, or PID enable can be issued at up to 28 V DC, while the input stage has a pull-up resistance of 4 kΩ to minimize current draw from PLC source cards. These interfaces support direct communication with common low-voltage control devices used for automated pump and fan operation.
