FC-202PK25T2136H9357 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The FC-202PK25T2136H9357 is a drive from the VLT FC 202 AQUA Drives series by Danfoss, featuring a rated power of 0.25 kW and an efficiency of 0.94. It operates on a mains voltage of 200 to 240 VAC three phase power and supplies a continuous output current of 1.8 A. The drive supports a maximum ambient temperature of 50°C and a maximum input current of 1.6 A.
Internal Product Review
The FC-202PK25T2136H9357 is a Danfoss VLT FC 202 AQUA drive rated at 0.25 kW for 200 to 240 VAC service. A 0.94 efficiency rating and 1.8 A continuous output current give the unit impressively clean electrical performance for light industrial duty. Operation at ambient temperatures up to 50 °C makes the drive a strong choice for dependable AQUA applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202PK25T2136H9357 is an AC variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. As part of the wider VLT AQUA Drive product group, it is used in industrial automation where centrifugal pumps or blowers must follow changing flow or pressure commands. By varying the frequency and voltage delivered to an induction motor, the drive reduces energy consumption and mechanical stress in municipal water supply, irrigation, and treatment facilities. The model accepts three-phase low-voltage power and mounts inside a control panel with other process instrumentation.
With a rated motor power of 0.25 kW, the drive supplies an output current of 1.8 A for compatible fractional-horsepower pump motors. The input section accepts a mains voltage range of 200 to 240 VAC and remains stable with a supply variation of ±10%. Electrical conversion efficiency reaches 0.94, so only a small portion of the incoming energy is dissipated as heat. The stated full-load thermal loss is 21 W, which must be considered when determining control-panel ventilation. Continuous apparent power demand at 208 V is 0.65 kVA, while the maximum input current is limited to 1.6 A. The three-phase topology distributes current across the supply lines, and a 10 A prefuse protects the upstream conductors. Output conductors up to 4 mm² and disconnect wiring up to 6 mm² can be terminated in the built-in spring clamps, simplifying connections inside the panel.
The drive maintains full output at a maximum ambient temperature of 50 °C when the installation altitude does not exceed 1000 m. At higher elevations, reduced air density lowers the cooling capacity available to the power electronics. Derating allows continuous operation at altitudes up to 3000 m by proportionally reducing output current and switching frequency. Panel placement must provide sufficient airflow around the unit, especially in warm locations or installations above the full-output altitude limit. The enclosure should also be positioned so that heat from adjacent process equipment does not raise the air temperature around the drive beyond its permitted operating range.
