FC-202PK25T2134F6397 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202PK25T2134F6397 is part of the VLT FC 202 AQUA Drives series and operates on three phase power at 200 to 240 VAC. This drive has a shaft output of 0.25 kW and an efficiency rating of 0.94. It delivers a continuous output current of 1.8 amps and is classified as IE2 energy efficiency.
Internal Product Review
The FC-202PK25T2134F6397 is a Danfoss VLT FC 202 AQUA drive built for efficient motor control on 200-240 VAC three-phase power. IE2 energy efficiency and 0.94 efficiency support economical operation in water and process control service. A 0.25 kW shaft output with 1.8 A continuous output current highlights consistent drive performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202PK25T2134F6397 is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. In water-handling installations, it modulates induction motor speed so pumps can match real-time demand, reducing energy consumption and mechanical stress. The product carries the internal 202 identifier and accepts three-phase power to deliver precise torque regulation in filtration skids, booster sets, and similar fluid systems.
This drive draws a continuous input current of 1.6 A from a 200–240 VAC utility supply and converts it into a motor-side waveform that supplies 1.8 A at rated load or up to 2.7 A during short acceleration periods. Conversion efficiency reaches 0.94, allowing a 0.65 kVA input at 208 V to produce the required output while limiting heat buildup. Its energy-use classification is IE2. A 10 A upstream fuse protects the supply conductors against excessive current. The controller supports shielded motor cable runs of up to 150 m and unshielded runs of up to 300 m, providing flexibility for pump-room layouts. The minimum ambient temperature for full-load operation is 0 °C, supporting cold starts in unheated service areas. Continuous operation is supported with three-phase motors rated at 0.34 hp and 208 V.
The enclosure can operate at ambient temperatures up to 50 °C and at elevations up to 1000 m without derating. Power dissipation is limited to 21 W at rated load, which reduces cabinet ventilation requirements. Mechanical output reaches 0.25 kW, providing controlled pump operation for small distribution loops. When longer cable runs are used, built-in radio-frequency interference mitigation suppresses conducted electrical noise that could otherwise affect nearby control and instrumentation circuits.
