FC-202PK25T2134F6385 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202PK25T2134F6385 is part of the VLT FC 202 AQUA Drives series and operates with three phase power at a mains voltage of 200 to 240 VAC. This drive features a shaft output of 0.25 kW and supports a continuous output current of 1.8 A. It provides an 8-bit analog output resolution and achieves an efficiency of 0.94.
Internal Product Review
The FC-202PK25T2134F6385 is a Danfoss VLT AQUA drive designed for three-phase power on 200 to 240 VAC systems. With 0.25 kW shaft output and 0.94 efficiency, the drive delivers impressively stable low-power performance for water and process applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202PK25T2134F6385 variable frequency drive is produced by Danfoss and belongs to the VLT FC 202 AQUA Drives series. As a three-phase inverter, it modulates the speed of centrifugal pumps, blowers, and other water-handling motors so that flow or pressure can be matched to real-time demand in treatment plants and irrigation systems. By converting fixed mains power into a regulated output waveform, the unit provides electronic throttling without mechanical valves, lowering energy use and allowing tighter process control within automated fluid networks.
Its motor output is rated at 0.25 kW, a continuous mechanical power level that aligns with small pump motors found in branch loops and booster skids. The drive accepts a supply range of 200 to 240 VAC, allowing it to connect directly to low-voltage three-phase panels in utility rooms. Continuous motor output current is limited to 1.8 A, so conductors and overload protection can be sized accordingly. Overall conversion efficiency reaches 0.94, meaning that 6% of the input power is dissipated as heat under rated conditions. Upstream circuit protection is provided by a recommended 10 A pre-fuse, which interrupts fault current before it damages the power semiconductors.
The control terminals also support process signals. An analog output channel can drive loads with an impedance as low as 500 Ω, and its 8-bit resolution provides 256 discrete levels for proportional valve or instrumentation commands. On the logic side, sensor switches may apply up to 28 V DC without overstressing the digital input circuitry. The transistor output can supply up to 40 mA to status lamps or other compatible signaling devices. These electrical limits allow transducers, PLC cards, and indicator hardware to be matched to the drive without additional isolation modules.
