FC-202P90KT6136H9378 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P90KT6136H9378 is a 125 horsepower drive from the VLT FC 202 AQUA Drives series with a power rating of 90 kW and an efficiency of 0.98. It operates on three phase power and provides a continuous output current of 131 Amps at 575 V. The drive supports a maximum ambient temperature of 50 °C and allows use at altitudes up to 1000 meters with no derating.
Internal Product Review
The FC-202P90KT6136H9378 is a Danfoss VLT FC 202 AQUA Drive engineered for 90 kW service in three-phase power applications. Efficiency of 0.98 and continuous output current of 131 A support strong energy performance and stable load handling in pump and water systems. Operation at ambient temperatures up to 50 °C adds valuable installation flexibility, making this drive a highly capable choice for demanding AQUA duty.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P90KT6136H9378 is a variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. Designed for pump and blower duty in water and wastewater plants, the inverter converts fixed-frequency mains power into a regulated three-phase output. This variable output allows flow to follow process demand while reducing energy consumption in applications that do not require continuous full-speed operation.
With a 575 V supply, the drive is rated for 90 kW, which is equivalent to 125 HP. During continuous operation, it can deliver 131 A of motor current while maintaining an efficiency of 0.98. The resulting power loss is approximately 1,800 W, and the integral heat sink removes this heat without auxiliary cooling. The drive requires three-phase input power to support its rated output and maintain stable operation under load. A 250 A prefuse provides upstream protection for the input section and helps isolate faults before they affect the supply circuit. These operating characteristics allow the drive to control heavy centrifugal loads while maintaining regulated motor current during changing process conditions.
The continuous apparent power capacity reaches 130.5 kVA, and the steady-state line current is limited to 119 A. Short-term overload is accommodated by an output limit of 144 A, so conductors and protective devices should be selected for the expected operating load. Ambient operation is permitted at temperatures up to 50 °C, allowing the drive to function in warm electrical rooms and enclosed industrial areas with suitable ventilation. No altitude derating is required at elevations up to 1000 m, while controlled power reduction permits operation at elevations as high as 3,000 m. Motor or line terminals accept conductors up to 150 mm², and the disconnect path accepts a single conductor up to 185 mm². Brake or load terminals accommodate conductors up to 95 mm². Shielded motor cables may extend up to 150 m, while unshielded cables may extend up to 300 m for installations in remote pump houses or across large water-processing facilities.
