FC-202P90KT6131U2670 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P90KT6131U2670 is part of the VLT FC 202 AQUA Drives series and has a power rating of 90 kW with a continuous output current of 131 Amps. This drive supports three phase power, delivers an efficiency of 0.98, and has a maximum ambient temperature of 50°C. It is designed for motors up to 125 HP and supports maximum shielded and unshielded motor cable lengths of 150 m and 300 m respectively.
Internal Product Review
The FC-202P90KT6131U2670 is a Danfoss VLT FC 202 AQUA drive with a 90 kW rating for three-phase power systems. Continuous output current of 131 A and 125 HP capacity support smooth, dependable performance in high-demand pump applications. An efficiency rating of 0.98 makes the unit an excellent choice for energy-conscious installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P90KT6131U2670 variable frequency drive belongs to the VLT FC 202 AQUA Drives series from Danfoss and is part of the VLT AQUA Drive product group identified by the internal 202 code. It is designed for pumps, blowers, and other water utility applications where variable speed is required to maintain constant flow or pressure. By converting fixed-frequency input into programmable output, the unit allows automation controllers to regulate motor torque, reduce hydraulic shock, and improve energy efficiency in treatment plants and distribution networks.
Rated at 90 kW, or approximately 125 HP, the inverter connects to three-phase power at 550 V and draws a continuous input current of 124.3 A, which can increase to 137 A during acceleration. It can supply 131 A continuously, with an intermittent limit of 144 A for transient pump surges. An efficiency of 0.98 keeps thermal dissipation to 1800 W, reducing the cooling load inside the enclosure. The control terminals provide one analog output that supports loads down to 500 Ω, a digital output capable of sourcing 40 mA, and pulse signaling up to 32 kHz for high-resolution feedback. Mains-side protection supports a maximum pre-fuse rating of 250 A, and the drive accommodates unshielded motor cables up to 300 m long.
The drive operates without derating in ambient air temperatures up to 50 °C. It supports shielded motor leads up to 150 m long, allowing installation away from a pump while maintaining electromagnetic compatibility. The intermittent current capacity provides additional output for rapid valve changes, pipeline flushing cycles, and other short-duration load increases. Its analog, digital, and pulse terminals connect the drive to PLC-based water management systems for command input and operating feedback. Programmable output frequency allows connected motors to respond to changing flow or pressure requirements without relying on mechanical throttling. The supported cable lengths also provide flexibility when the motor and drive must be installed in separate areas of a facility.
