FC-202P90KT6131G2018 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P90KT6131G2018 is part of the VLT FC 202 AQUA Drives series and has a power rating of 90 kW with a continuous output current of 131 A. This drive provides 125 horsepower and operates at a maximum output frequency of 590 Hz. It supports three phase power and can function in ambient temperatures up to 50 °C.
Internal Product Review
The FC-202P90KT6131G2018 is a Danfoss VLT AQUA drive rated at 90 kW for three-phase power applications. With 0.98 efficiency and 131 A continuous output current, the drive delivers strong electrical performance for demanding pump and fan systems. The 590 Hz maximum output frequency makes this model an excellent choice for precise and responsive motor control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P90KT6131G2018 is a variable frequency drive manufactured by Danfoss in the VLT FC 202 AQUA Drives series. It modulates the output voltage and frequency supplied to centrifugal pumps and fans so process controllers can match motor speed to instantaneous flow demand. By replacing throttling valves with electronic speed control, the drive helps industrial and municipal installations reduce energy use and lessen mechanical stress on fluid-handling equipment.
With three-phase input power, the drive supplies a continuous output current of 131 A to motors rated up to 90 kW. That electrical capacity corresponds to a mechanical output of 125 HP under nominal conditions. Overall conversion efficiency is 0.98, so approximately 1800 W of heat must be dissipated through cabinet ventilation. To remain within the permitted thermal range, the surrounding air temperature must not exceed 50 °C. Cable terminations accommodate 150 mm² line and motor conductors, while the dedicated brake connection accepts 95 mm² wiring. Supply imbalance must remain within 3.0% to maintain the intended motor voltage. The design permits one power-up per minute to protect the DC-link components from excessive electrical and thermal stress.
Drive sequencing and protection parameters support a broad range of operating conditions. The inverter can generate an output frequency of up to 590 Hz, enabling operation with high-speed auxiliary machinery or permanent-magnet motors. Branch-circuit protection is based on a maximum prefuse rating of 250 A. Acceleration or deceleration ramps can be extended to 3600 s for gradual hydraulic transitions that reduce pressure surges in connected piping. The enclosure can withstand a relative humidity of 95% without condensation. Shielded motor leads may extend up to 150 m, while unshielded leads may extend up to 300 m, allowing the drive to serve remotely located equipment in large treatment plants. These cable limits provide flexibility when routing motor connections through expansive facilities or around existing process equipment.
