FC-202P90KT Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P90KT is part of the VLT FC 202 AQUA Drives series and has a power rating of 90 kW with a maximum output of 125 HP. This drive operates on three phase power and features one analog output with 8 bit resolution and two digital outputs. It can function at a maximum altitude of 1000 meters without derating and has an energy efficiency class of IE2.
Internal Product Review
The FC-202P90KT is a Danfoss VLT FC 202 AQUA drive rated at 90 kW for three-phase power. IE2 efficiency and a 32 kHz maximum output frequency support smooth motor control and energy-conscious operation. A 125 HP capacity makes this drive an excellent fit for demanding water and wastewater applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P90KT is an AC variable frequency drive produced by Danfoss within the VLT FC 202 AQUA Drives series. The unit regulates centrifugal pump and fan motors in water treatment systems, allowing motor speed to follow changes in flow or pressure demand. It converts the incoming mains supply into a variable-frequency output waveform for compatible induction motors. Adjusting motor speed instead of relying entirely on valves or dampers can reduce unnecessary energy use during periods of lower demand.
The drive supplies up to 90 kW of continuous electrical power, which corresponds to 125 HP. It is designed for three-phase power, so it can connect to an appropriate three-phase industrial supply without phase conversion. The output carrier frequency can be increased to 32 kHz to reduce audible motor noise when the connected equipment supports that setting. The analog interface includes one output channel with 8-bit resolution, 0.8% full-scale accuracy, and a minimum load impedance of 500 Ω. Two transistor digital outputs share a combined current limit of 40 mA for connected control devices. The drive supports motor-cable capacitance up to 10 nF and withstands vibration levels of 1.0 g without a loss of performance. Its energy performance meets the IE2 efficiency class.
Ambient operation is permitted at temperatures up to 50 °C without derating. Full nameplate current is available at elevations up to 1000 m, while operation between 1000 m and 3000 m requires output derating to manage thermal loading. Shielded motor cable can extend up to 150 m, providing substantial routing distance where electromagnetic compatibility measures are required. Unshielded motor cable may extend to 300 m when the installation conditions permit its use. The analog output must be connected to a load of at least 500 Ω to maintain its stated accuracy. Conformal-coated electronics provide additional protection against moisture and airborne contaminants while supporting operation in installations exposed to vibration.
