FC-202P7K5T6131Z9342 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P7K5T6131Z9342 is a drive from the VLT FC 202 AQUA Drives series with a 7.5 kW power rating and supports three phase power. It delivers a maximum output current of 11.5 A at 525-550 V and features an efficiency of 0.97. The drive can be used with shielded motor cables up to 150 meters and has an estimated power loss of 261 watts.
Internal Product Review
The FC-202P7K5T6131Z9342 is a Danfoss VLT FC 202 AQUA drive designed for demanding process applications, with a 7.5 kW power rating and three-phase power input. Efficiency of 0.97 and support for shielded motor cable lengths up to 150 m make this unit a strong choice for energy-conscious installations.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P7K5T6131Z9342 is a variable frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series, which is designed for centrifugal pumps, blowers, and general water-handling equipment. By modulating the output frequency delivered to an induction motor, the unit provides process control without mechanical throttling. This method supports energy-efficient flow regulation in irrigation, wastewater, and municipal water supply systems.
The drive is designed for three-phase power systems and can continuously deliver 7.5 kW, which is equivalent to 10 HP, at the motor terminals. Its conversion efficiency is 0.97, while the input draws no more than 10.4 A under rated conditions. Continuous output current is 11.0 A when the mains voltage is between 551 and 600 V, while it increases to 11.5 A when the voltage is between 525 and 550 V. Upstream circuit protection is provided by a 32 A pre-fuse. The inverter tolerates a phase imbalance of up to 3.0% and should not be power-cycled more than twice per minute to remain within its thermal limits. Power leads are limited to a conductor size of 4 mm², while disconnect wiring can use conductors up to 6 mm² so that the connections fit the integrated spring clamps.
Full-load operation is permitted at ambient temperatures from 0 °C to a maximum of 50 °C, establishing the required temperature range for the installation enclosure. The drive dissipates 261 W of heat during operation, which should be considered when sizing cabinet ventilation. Shielded motor cabling can extend up to 150 m without exceeding the drive series’ electromagnetic compatibility limits. Unshielded motor cabling can extend up to 300 m when the installation permits its use. Appropriate conductor routing and balanced cable placement help reduce electrical imbalance at the motor terminals. The drive should be installed with enough surrounding clearance to support heat removal and prevent nearby components from restricting ventilation airflow.
