FC-202P7K5T6131G2832 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P7K5T6131G2832 is a VLT FC 202 AQUA Drives series product with a power rating of 7.5 kW and supports three phase power. This drive delivers a continuous output of 11.5 A at 525-550 V and an intermittent output of 16.5 A at 551-600 V. It features an efficiency of 0.97 and can handle a maximum output frequency of 32 kHz.
Internal Product Review
The FC-202P7K5T6131G2832 is a Danfoss VLT FC 202 AQUA drive rated at 7.5 kW and 10 HP. Three-phase power input and 0.97 efficiency support stable operation and strong energy performance in demanding pump and fan applications. A 32 kHz maximum output frequency stands out for smooth motor control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P7K5T6131G2832 is an AC variable frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. As part of the VLT AQUA Drive product group, it is optimized for centrifugal pumps, blowers, and other water-handling machinery found in treatment plants and irrigation systems. The device accepts three-phase power and synthesizes a variable-frequency output so that PLCs or standalone controllers can regulate motor speed in real time. This control helps stabilize pressure, prevent water hammer, and lower energy use in automated fluid processes.
With a DC link supplied by 525–550 V mains, the inverter provides a continuous motor current of 11.5 A. A short-term overload current of 16.5 A is available when the line voltage is between 551 and 600 V, helping pumps overcome startup or blockage torque. Drive conversion losses are limited because full-load efficiency is 0.97, so 261 W of heat must be removed under rated conditions. Mains current is 10.4 A, which is relevant when selecting upstream protection devices. The output stage can switch at carrier frequencies up to 32 kHz, reducing audible noise and improving current waveform quality. An internal 8-bit digital-to-analog converter can drive a 500 Ω load, supporting analog feedback to supervisory controls without external buffers.
The drive has a rated output of 7.5 kW for compatible three-phase motors. Field wiring uses motor and mains conductors up to 4 mm², while disconnect terminals accept conductors up to 6 mm² when a local isolator is required. The maximum prefuse rating is 32 A, which must be coordinated with the specified input current for short-circuit protection. Control logic tolerates digital input levels up to 28 V DC. The analog output supports proportional valve positioning, speed references, and monitoring tasks in typical SCADA control loops.
