Product Description:

The FC-202P7K5T4E66H3TG is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 202 AQUA Drives series. It serves pumps, blowers, and fans in water-handling systems by adjusting motor speed instead of relying on throttling valves to regulate flow. The internal power electronics accept fixed-frequency utility power and generate a controlled output that responds to real-time process demand. This method can improve energy efficiency in industrial automation systems that require accurate control of fluid flow or pressure.

The drive connects to mains supplies rated at 380–480 VAC and operates with three-phase power, permitting direct connection to compatible industrial feeders. Its inverter section supports a continuous electrical power rating of 7.5 kW, which corresponds to a mechanical motor output of 10 hp. This output capacity is suitable for medium-sized pumps used in applications such as municipal lift stations, water treatment systems, and irrigation equipment. The graphical local control panel provides access to operating parameters, local start and stop commands, and diagnostic information through a backlit display. Operators can use this interface to review drive status and adjust settings directly at the installed unit.

The housing carries an IP66 / NEMA 4X rating, sealing the electronics against dust, water jets, and washdown conditions. This enclosure allows the drive to be wall-mounted in humid pump rooms and other locations where airborne moisture or water exposure may occur. Conducted emission control is handled by an integrated RFI Class A1/B (C1) filter, which helps limit electrical interference near sensitive instrumentation circuits. The power stage also includes a Safe Stop function that removes motor torque after a stop command while maintaining motor-state monitoring. The Series Identifier 202 indicates the drive’s position within the product line, while its available option-card support accommodates additional control and communication requirements.