FC-202P7K5T4131X5828 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The FC-202P7K5T4131X5828 is a 10 HP drive from the VLT FC 202 AQUA Drives series by Danfoss. It supports three phase 380 to 480 VAC power input with a continuous output current of 14.5 A at 441-480 V and delivers an efficiency of 0.97. The drive has a maximum output frequency of 590 Hz and operates in ambient temperatures up to 50 °C.
Internal Product Review
The FC-202P7K5T4131X5828 is a Danfoss VLT FC 202 AQUA drive rated for 10 HP and 7.5 kW duty. Operation on 380 - 480 VAC with 14.5 A continuous output current supports stable performance in demanding pump and fan applications. An efficiency of 0.97 and output frequency capability to 590 Hz make the drive an excellent choice for precise, energy-conscious process control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P7K5T4131X5828 is an AC variable frequency drive produced by Danfoss as part of the VLT FC 202 AQUA Drives series. It regulates the speed of three-phase induction motors used in pumps, blowers, and other water-handling equipment, allowing direct process control without mechanical throttling. The unit converts fixed-frequency mains power into a variable-frequency output that matches motor speed to flow demand in industrial and municipal automation systems.
The drive operates from a 380-480 VAC three-phase supply and has a motor output rating of 7.5 kW. Under nominal conditions, the inverter delivers 14.5 A of continuous output current while drawing no more than 13.0 A from the line. Upstream circuit protection should use 30 A fuses to protect the supply conductors and drive input stage. The transformerless front end provides 11.6 kVA of continuous apparent power and maintains a true power factor of at least 0.9. Conversion efficiency reaches 0.97, allowing most of the input energy to reach the connected motor rather than being dissipated as heat. The output frequency extends to 590 Hz, supporting compatible high-frequency motors and overspeed cleaning cycles. Power cycling is limited to two starts per minute to reduce stress on the DC-link capacitors.
The drive maintains full performance at ambient temperatures up to 50 °C and relative humidity levels up to 95% without condensation. Its estimated heat loss is 225 W, which should be considered when selecting panel ventilation and maintaining adequate clearance around the enclosure. For electromagnetic compatibility, the permitted motor cable length is up to 150 m with shielded cable, while an unshielded cable may extend to 300 m. These cable allowances support installations in which the drive panel is located away from a pump or other driven equipment. The input stage provides a displacement power factor greater than 0.98, minimizing reactive current on the feeder. Adequate cable routing, grounding, and ventilation help preserve stable operation when the drive is installed in confined panels or connected to remotely located water-handling equipment.
