FC-202P7K5T4 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P7K5T4 is a VLT FC 202 AQUA Drives series motor drive with a power rating of 7.5 kW and operates on three-phase power with a mains voltage range of 380 to 480 VAC. It delivers a rated output of 10 HP and supports a continuous output current of 16 A at 380–440 V, with an efficiency of 0.97. The drive handles a maximum ambient temperature of 50 °C and can be installed at altitudes up to 1000 meters without derating.
Internal Product Review
The FC-202P7K5T4 is a Danfoss VLT AQUA drive engineered for dependable variable-speed control on 380 to 480 VAC three-phase power. A 7.5 kW rating with 16 A continuous output current supports stable pump and fan duty in demanding water-handling applications. High 0.97 efficiency makes the unit a very capable choice for energy-conscious drive systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P7K5T4 variable frequency drive belongs to the VLT FC 202 AQUA Drives series produced by Danfoss. Intended for centrifugal pump and fan applications, the unit adjusts motor speed to match flow demand, saving energy while maintaining process stability in water and wastewater plants. The drive can regulate pump speed in response to process commands, reducing throttling losses and pressure fluctuations in standard three-phase installations.
On the input side, the drive accepts three-phase mains power between 380–480 VAC, drawing a maximum of 14.4 A under nominal line conditions and converting it into regulated motor power. The inverter delivers a continuous apparent power of 11.6 kVA and supports a motor output rating of 7.5 kW, which corresponds to 10 HP. During operation at 460 V, the output current reaches 16 A, and the conversion efficiency is 0.97, so only a small portion of the supplied energy becomes heat. Installation is permitted at elevations up to 1000 m without derating. The internal brake chopper may operate at a duty cycle of up to 6% to dissipate regenerated energy during rapid deceleration.
During normal operation, the electronics dissipate 225 W, and the heat sink permits ambient temperatures up to 50 °C before derating is required. The recommended upstream protection uses a 30 A prefuse to help protect the input circuit from excessive current. Danfoss lists a gG-16 fuse for standard installations and permits a maximum gG-32 fuse where the installation requires greater protection capacity. When braking energy must be absorbed, a dynamic resistor with a resistance of at least 72 Ω should be selected, while 82.4 Ω is the nominal resistance for balanced thermal loading. The resistor works with the internal brake chopper to absorb energy returned during motor deceleration without placing that energy back onto the supply line.
