FC-202P7K5T2131Z5359 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P7K5T2131Z5359 is a 10 horsepower drive from the VLT FC 202 AQUA Drives series, with a power rating of 7.5 kW and efficiency of 0.96. It operates with a mains voltage between 200 and 240 VAC on three phase power, and withstands a maximum ambient temperature of 50 degrees Celsius. The unit supports a maximum output frequency of 32 kHz and can handle shielded cable runs up to 150 meters and unshielded up to 300 meters.
Internal Product Review
The FC-202P7K5T2131Z5359 is a Danfoss VLT FC 202 AQUA drive rated for 7.5 kW on 200 to 240 VAC mains. The 0.96 efficiency and three-phase power configuration make the drive especially appealing for energy-conscious water and pumping applications. Brake performance is a strong point, with 0.570 kW continuous power and 20.8 Ω nominal resistance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P7K5T2131Z5359 is a variable frequency drive from Danfoss that belongs to the VLT FC 202 AQUA Drives series within the wider VLT AQUA Drive product group. It is used in water-handling automation to regulate centrifugal pumps, blowers, and fans by varying motor speed rather than relying on mechanical throttling. By receiving process feedback and modulating the inverter output, the drive maintains stable flow or pressure and helps reduce energy consumption in three-phase industrial installations.
A three-phase input range of 200 to 240 VAC feeds the power section, and carrier frequencies can be selected up to 32 kHz to reduce motor noise. The inverter delivers a continuous motor output of 7.5 kW, while its full-load efficiency reaches 0.96. The brake circuitry dissipates 0.570 kW through external resistors matched to a minimum resistance of 17.7 Ω or a nominal resistance of 20.8 Ω, allowing the motor to decelerate quickly. Control inputs have an impedance of 4 kΩ and accept up to 28 V DC. The single digital output can supply 40 mA for status indication. Protective coordination requires a 63 A prefuse. The electronics permit no more than two power-ups per minute to limit stress caused by inrush current.
Full current is available at altitudes up to 1000 m without derating, and the maximum ambient air temperature is 50 °C before thermal limiting begins. Motor leads may extend as far as 150 m with shielded cable or 300 m with unshielded cable while maintaining electromagnetic compatibility. The drive operates exclusively on three-phase power and carries the internal series identifier 202. Its mounting dimensions and terminal assignments support integration with equipment in the AQUA platform. The parameter structure provides access to operating settings for pump, blower, and fan control applications.
