FC-202P7K5S4131X6756 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P7K5S4131X6756 is part of the VLT FC 202 AQUA Drives series and has a power rating of 7.5 kW with a maximum efficiency of 0.96. The drive supports a mains voltage range of 380 to 480 VAC and delivers 10 HP output with a maximum continuous output current of 14.5 A at 441-480 V. It operates up to 50 °C ambient temperature and allows installation up to 1000 meters altitude without derating.
Internal Product Review
The FC-202P7K5S4131X6756 is a Danfoss VLT FC 202 AQUA drive with a 7.5 kW power rating and 10 HP capacity. Operation across 380 to 480 VAC and 0.96 efficiency makes this unit a very capable choice for energy-conscious drive applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P7K5S4131X6756 is a variable frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. It regulates the speed of centrifugal pumps and blowers so that flow can be matched to demand in municipal and industrial water treatment systems. The unit converts single-phase mains power into a controlled three-phase output, allowing automated systems to reduce energy consumption, limit mechanical stress on piping, and maintain stable process pressure. Its pump-oriented control capabilities also support applications that require consistent operation as water demand changes throughout the day.
The drive accepts an input voltage of 380–480 VAC for use with common low-voltage power networks. Within this range, the inverter provides a rated motor output of 7.5 kW while drawing a continuous input current of 30 A and supplying 14.5 A to the motor terminals. Its efficiency is 0.96, which means that approximately 4% of the input energy is converted to heat under rated operating conditions. The listed power loss at rated load is 300 W. During intermittent overloads, the input current may rise to 33 A, while the output current may reach 15.4 A. A 63 A upstream fuse provides circuit protection, and the terminals accept control, motor, or brake conductors with cross-sectional areas up to 10 mm².
The drive provides continuous apparent power of 11.6 kVA. The enclosure can operate at ambient temperatures up to 50 °C when installed below an elevation of 1000 m. Operation above that elevation requires derating, although the unit can remain functional at elevations up to 3000 m for high-altitude pumping applications. The drive supports up to 150 m of shielded motor cable or 300 m of unshielded motor cable, allowing connection to pumps installed far from the control panel while maintaining pulse-width modulation performance. Its nominal shaft output corresponds to 10 HP, making it suitable for compatible pump and blower motors without exceeding the drive’s rated output capacity.
