FC-202P7K5S2131Z1648 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-202P7K5S2131Z1648 is part of the VLT FC 202 AQUA Drives series and has a power rating of 7.5 kW with a maximum output of 10 horsepower. It operates on 200 - 240 VAC single-phase power and supports a continuous output current of 30.8 amps and a maximum output frequency of 590 Hz. The drive includes 2 analog inputs, 1 analog output, and achieves an efficiency of 0.98.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P7K5S2131Z1648 is a variable frequency drive produced by Danfoss for the VLT FC 202 AQUA Drives series. It regulates motor speed in water treatment and distribution systems, allowing pumps and fans to maintain precise flow or pressure. Variable-speed operation can reduce energy consumption and mechanical wear compared with continuously running equipment controlled by throttling valves or dampers. The drive can receive process signals from external transmitters and adjust its output to match changing system demand.
This model operates from a 200 to 240 VAC supply and delivers a continuous apparent power of 11.1 kVA. Its output terminals can provide 30.8 A of current to a 10 hp load, while the conversion chain operates with an efficiency factor of 0.98 to limit heat generation. The drive has a mechanical rating of 10 HP and can modulate motor speed up to 590 Hz, providing a broad operating range for centrifugal equipment. Two differential analog input channels and one analog output channel accommodate process transmitters and external control signals. The input draws 59 A under full load, and the unit supports a 100 A prefuse for branch-circuit protection. Acceleration ramps can be set as long as 3,600 seconds to reduce hydraulic shock when starting pumps or moving large volumes of water.
The enclosure can operate at ambient temperatures up to 50 °C, while internal power losses are limited to 150 W to ease panel ventilation requirements. Rated output power is 7.5 kW. Shielded motor cables can extend up to 150 m without output filters, providing flexibility when the motor is installed far from the control panel. Unshielded cable runs can reach 300 m where electromagnetic noise is less critical and the surrounding installation permits their use. The single-phase input topology supports locations where three-phase mains power is unavailable. Ramp-down settings can match the maximum ramp-up time, allowing controlled and symmetrical deceleration. This controlled slowdown can help reduce pressure surges in piping and limit mechanical stress on connected pumping equipment.
