FC-202P75KT6131U2669 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-202P75KT6131U2669 is part of the VLT FC 202 AQUA Drives series and designed for three phase power systems. This drive features a typical shaft output of 55 kW for high overload and 75 kW for normal overload with a maximum output frequency of 32 kHz. Its continuous output currents are 83 A at high overload and 100 A at normal overload, and it achieves an efficiency of 0.98.
Internal Product Review
The FC-202P75KT6131U2669 is a Danfoss VLT FC 202 AQUA drive with three-phase power input and 0.98 efficiency. Continuous output up to 100 A and typical shaft output up to 75 kW support demanding pump and fan applications with confident control. Maximum ambient capability up to 50 °C makes the unit a strong choice for industrial water handling systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-202P75KT6131U2669 is a Danfoss AC variable frequency drive in the VLT FC 202 AQUA Drives series. The unit accepts three-phase power and produces a speed-controlled output for centrifugal pumps, blowers, and other fluid-handling equipment used in industrial and municipal automation. Integrated control functions allow a connected PLC to regulate pressure or flow with minimal overshoot. This capability supports efficient operation in water distribution, wastewater treatment, pumping stations, and similar processes where demand changes throughout the operating cycle.
Under heavy-overload operation, the drive provides a shaft output of 55 kW with a continuous motor current of 83 A. Under normal-overload operation, it provides a shaft output of 75 kW with a continuous motor current of 100 A. System efficiency reaches 0.98, limiting the portion of input power that is dissipated as heat. Pulse-width modulation operates at frequencies up to 32 kHz, while the control terminals accept digital signals up to 28 V DC. The line and motor terminals accept copper conductors with cross-sectional areas up to 150 mm², and the brake terminals accept conductors up to 95 mm². The drive supports a shielded motor cable up to 150 m long or an unshielded motor cable up to 300 m long without additional output filters. Supply-side protection must use fuses rated no higher than 225 A.
The electronics can operate at an ambient temperature of 50 °C while remaining within the applicable temperature class. Installation is permitted at elevations up to 1000 m above sea level without derating, making the drive suitable for many mechanical-room and plant environments. Expected converter power loss is 1500 W, which should be considered when arranging enclosure airflow and heat removal. The combination of high-current output, long motor-cable support, and separate brake connections accommodates installations with substantial distances between the drive, motor, and braking equipment. Its three-phase input and variable-frequency output allow pump speed to follow process demand instead of relying solely on throttling valves or continuous full-speed operation.
